Setting The Speaker Distances - Integra RDV-1.1 Instruction Manual

Super audio cd & dvd audio/video player
Hide thumbs Also See for RDV-1.1:
Table of Contents

Advertisement

Configuration Page 79 Monday, May 31, 2004 10:49 AM
Configuring the RDV-1.1—Continued
5
Use the Up and Down [
buttons to select Surround
Remote controller
Speaker, press the [Enter] but-
ton, use the Left
[
] buttons to select an option,
Enter
and then press the [Enter] but-
ton.
Large: Select if the surround speakers
are large.
Small (default): Select if the surround
speakers are small.
Off: Select if no surround speakers are
being used.
If the Subwoofer setting is set to Off,
only the Large and Off options can be
selected.
6
When you've finished, press the
[Setup] button to exit setup, or
Remote controller
press the Left [
edly to go back to the main setup
menu.

Setting the Speaker Distances

1
Use the Up and Down [
buttons to select Speaker Dis-
Remote controller
tance, press the [Enter] button,
use the Up and Down [
buttons to select On, and then
Enter
press [Enter] again.
When the Speaker Distance is set to
Off, these settings cannot be selected.
2
]/[
]
Remote controller
and
Right [
]/
] button repeat-
]/[
]
3
Remote controller
]/[
]
Notes:
• The Speaker Distance settings have no effect on
SACD (multichannel area and 2-channel area) and
192 kHz/176.4 kHz DVD-Audio.
and
Use the Up
Down [
buttons to select each speaker,
press the [Enter] button, use the
Left and Right [
specify the distance from each
Enter
speaker to the listening position,
and then press the [Enter] but-
ton.
Speaker distances can be specified in
steps of 1.0 ft. (0.3 m).
(The North American model displays
feet; other models display meters.)
Speaker
Range
Front Left
Center
Front Right
1.0–30.0 ft.
Surround
(0.3–9 m)
Right
Surround Left
Subwoofer
Notes:
• If the distance between the furthest
and nearest speakers is greater than
20 feet, corrected values suitable for
home theater use will be set automat-
ically.
When you've finished, press the
[Setup] button to exit setup, or
press the Left [
edly to go back to the main setup
menu.
]/[
]
]/[
] buttons to
Default
12 ft.
(3.6 m)
7.0 ft.
(2.1 m)
12 ft.
(3.6 m)
] button repeat-
79

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RDV-1.1 and is the answer not in the manual?

Table of Contents