Using The Dvd; Playing A Disc - Insignia NS-R27TR User Manual

Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo

Using the DVD

Playable discs
Playable
Disc logo
discs
DVD-Video Region code 1 or ALL
(see notes
1, 2, 4,
6,10, and
11)
DVD-RW
DVD-R
(see notes
1, 3, 4, 5, 6,
7, 8, 9, and
10)
DVD+RW
DVD+R
(see notes
1, 4, 5, 6, 9,
and 10)
Audio CD
(see notes
4, 6, and
10)
CD-RW
CD-R
(see notes
4, 5, 6, 9,
and 10)
Notes:
If you cannot play a disc with one of these logos,
one of the following may be the cause.
1 Your TV combo conforms to the NTSC color
system. Your TV combo cannot play discs
recorded in other color systems such as PAL.
2 Some video DVDs do not work as described
in this guide because of the limitations set by
disc's producers.
3 You cannot playback discs recorded in the
VR (Video Recording) format.
4 You may not be able to play scratched or
stained discs.
5 You may not be able to play some discs
because of incompatible recording
conditions, characteristics of the recorder, or
special properties of discs.
6 You can play discs which bear the marks
above. If you use non-standardized discs,
your TV combo may not play them or the
sound or video quality may be compromised.
7 You may be able to play back the unfinalized
DVD-R/RW disc recorded in the video
format. However, depending on the recording
status of a disc, the disc may not play or the
picture or sound may be distorted. In this
case, you need to finalize the disc with the
DVD recorder. Refer to the guide that came
with the DVD recorder.
Recorded Disc
signals Size
Digital 12 cm or
video 8 cm
(MPEG2)
Digital 12 cm or
video 8 cm
(MPEG2)
Digital 12 cm or
video 8 cm
(MPEG2)
Digital 12 cm or
audio 8 cm
Digital 12 cm or
audio 8 cm
www.insignia-products.com
8 You can only play discs that have been
recorded in the video format and finalized.
You cannot play unfinalized discs.
Depending on the recording status of a disc,
the disc may not play or the picture or sound
may be distorted.
9 If there is too much recording space left on a
disc (the used portion is less than 55 mm
across), the disc may not play back correctly.
10 Do not glue paper or put stickers on to the
disc. These may damage the disc and your
TV combo may not read the disc correctly.
11 The region code for your TV combo is 1. You
can play DVDs with region code 1 or ALL.
You cannot play DVDs with other region
codes.
Unplayable discs
Do not try to play any of the following discs, or
you may damage your TV combo:
• DVD-RAM
• CD-i
• Photo CD
• DVD-Audio
• DVD with a region code other than 1 or ALL
• DTS-CD
• Video CD
• CD-R/RW with MP3 files
• DVD-ROM for personal computers
• CD-ROM for personal computers
• Any other discs without compatibility
indications
Your TV combo can only play the sound
recorded on the normal CD layer. Your TV
combo cannot play the sound recorded on the
high density Super Audio CD layer.

Playing a disc

To play a disc:
1 Press the POWER button to turn on your
TV combo.
2 Press the OPEN/CLOSE
front panel to open the disc tray, then insert a
disc with the label side up.
3 Press the PLAY
button. The disc tray closes automatically
and playback starts.
Note
With DVDs that use titles for playback program
signals, playback may start from the second title
or may skip these titles.
4 To control playback:
• To freeze the picture, press the
PAUSE SLOW button. Sound is muted
•
when you freeze the picture. Press the
PLAY button to resume playback.
• To temporarily stop playback, press the
STOP button once.
• Press the PLAY
playback where you stopped.
button on the
OPEN/CLOSE
or the
button to resume
23