Download Print this page

Vixen Viper-MC90L Instruction Manual page 14

Advertisement

From left:
Erect-Image Mode
+
Diagonal Mirror Mode
+
Inverted lmage Mode
4-3 If the joystick is depressed when the light is illuminated at the desired mode,
mode will be selected at that mode. And when the mode is selected, the green
light will turn off and a red light at the selected mode will remain illuminated.
5. Three Modes
5-1 Erect-Image Mode (Initial setting mode when power is made on)
~ e l e s c o ~ e
will move in the direction that the joystick is tilted. Use this mode
when searching for an object while looking into the finder scope, or attaching a
terrestrial erect-image diagonal (optionally supplied) with eyepiece.
Although this can be used during viewing the object in the eyepiece, the
direction between the field of view and where the joystick is tilted does not
match.
In the case where an object is viewed in the eyepiece (diagonal mirror):
Viewing imqge will move in an opposite direction from side to side from where
the joystick is tilted. To synchronize movement of the joystick with the viewing
object, change to the Diagonal Mirror Mode.
In the case where an object is viewed through the eyepiece (straight-through
viewing): The viewed image will move in an opposite direction in upside down
and from side to side from where the joystick is tilted. To synchronize movement
of the joystick with viewing object, change to the Inverted lmage Mode.
-
--
--
-
rvlove joystick to
, :
7,-*
the
I
irjltt
I I ~ X T - .
>
- -
- ; *
I
-
Fielil of vie
h
of Fillcle~
El ect-imdcje nlocle 8 Eyepiece lells Icli.\(jol14~l lnir
I 01
1
.
lvli~ue joystick to
the
I
irjht
7
-
-
-
-
-
< .
-
T.ll(ret is seen .lt the centel
El ect-i~\l.lcje moi!e
. :
Eyepiece re:)$ 1St1 .~i(rht-thl or~ijh)
.
Fielil of uieh of Eyepiece lens
Tdl (jet
is
see11 .lt the celltel
(St1 diijllt-thl C*II(JIII
lvlove j0:ystick to
t l ~ z I,nttnm
I
ic~llt

Advertisement

loading

Related Products for Vixen Viper-MC90L