Insignia NS-15cltv User Manual page 17

NS-15CLTV - combined.fm Page 18 Wednesday, July 26, 2006 1:01 PM
Setting audio options
To set up general audio options:
1 While the TV is in DVD mode, press SETUP.
2 Press to select the Audio menu icon,
then press PLAY. The Audio Setup Page
opens.
3 Press repeatedly to go back to the
previous menu.
Setting up speaker output
To set up speaker output:
1 In the Audio Setup Page, highlight Speaker
Setup, then press
Setup Page opens.
2 Press to highlight Downmix, then
press PLAY.
3 Press to highlight Lt/Rt or Stereo, then
press PLAY.
• Lt/Rt—On a disc recorded with a
multi-channel soundtrack, the output
signal will be incorporated into a left and
right channel.
• STEREO—On a disc recorded with a
multi-channel soundtrack, the output
signal will be incorporated into stereo.
4 Press repeatedly to go back to the
previous menu.
Setting up Dolby Digital
To set up Dolby Digital:
1 In the Audio Setup Page, highlight Dolby
Digital Setup, then press
Dolby Digital Setup page opens.
2 Press to highlight DUAL MONO or
D.R.C, then press
18
PLAY. The Speaker
PLAY. The
PLAY.
www.insignia-products.com
Insignia NS-15CLTV 15" Combo DVD/LCD TV
• DUAL MONO—This is the output mode of
the L and R signals of the set audio
output. If it is set to "MIXED MONO," the
function only works when the DVD uses
5.1-channel sound.
• D.R.C—This is selected to adjust the
linear compression rate to obtain different
compression results of the signals.
3 Press to change the setting, then press
PLAY.
4 Press repeatedly to go back to the
previous menu.
Using the equalizer
You can select preset graphic equalizer patterns
according to the genre of the music being
played. You can also adjust the equalizer
settings.
To use the equalizer:
1 In the Audio Setup Page, highlight Channel
Equalizer, then press PLAY. The
Channel Equalizer page opens.
2 Press to highlight EQ TYPE, then
press PLAY.
3 Press to select one of the following
preset equalizer patterns:
• None
• Rock
• Pop
• Live
• Dance
• Techno
• Classic
• Soft
4 Select the setting you want, then press
PLAY.
5 Press repeatedly to go back to the
previous menu.
Setting up 3D sound
To set up 3D sound:
1 In the Audio Setup Page, highlight 3D
Processing, then press
Processing Page opens.
• V SURR—Turns virtual surround sound
on and off.
• Reverb Mode—Select a reverb mode.
2 Press repeatedly to go back to the
previous menu.
PLAY. The 3D