Setting Up Your Remote Control - Samsung LE26A41B Owner's Instructions Manual

Setting Up Your Remote Control

English-60
After it has been set up properly, your remote control can operate in five
different modes: TV, VCR, Cable, DVD, Set-top box. Pressing the
corresponding button on the remote control allows you to switch
between these modes, and control whichever piece of equipment you
choose.
Note
The remote control might not be compatible with all DVD Players,
VCRs, and Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1
Turn off your VCR.
2
Press the SELECT button and make sure that the VCR LED is
illuminated.
3
Press the SET button on your TV's remote control.
4
Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 63 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first
digit is a "0".
(If more than one code is listed, try the first one.)
5
Press the POWER
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 086.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons
still control your TV's volume.
button on the remote control.