Insignia Ns-Pdp50Hd; Remote; Installing Remote Control Batteries - Insignia NS-PDP50HD-09 User Manual

Insignia NS-PDP50HD-09 50" PDP TV

Remote

# Button Description
1 Press to turn your TV on or off.
POWER
2 COMP. Press to toggle between YPbPr1 and
YPbPr2 input.
3 VIDEO Press repeatedly to cycle through the
available VIDEO source inputs, including
VIDEO1, VIDEO2, S-VIDEO1, and
S-VIDEO2.
4 MTS/SAP Press repeatedly to cycle through the
available MTS/SAP sound options,
including SAP, MONO, and STEREO.
5 AUDIO Press to cycle through the available preset
audio modes, including Surround, Live,
Dance, Techno, Classic, Soft, Rock, Pop,
and Off.
6 CCD Press to cycle through the available closed
caption options, including:
• Analog–CC1, CC2, CC3, CC4, TT1,
• Digital–Service1, Service2,
7 SLEEP Press to cycle through the available preset
times before your TV turns off. Options
include O, 5, 10, 15, 30, 45, 60, 90, 120,
180, and 240 minutes.
8 Number Press to enter channel numbers directly.
buttons
9 RECALL Press to return to the previous channel.
10 MUTE Press to mute the sound. Press again to
restore the sound.
11 VOL +/- Press to adjust the volume.
TT2, TT3, TT4, or Off.
Service3, Service4, Service5,
Service6, and Off.
www.insignia-products.com
# Button Description
Press to open the Input Source menu
12 INPUT
showing the available input sources for
your TV. Press
source you want then press ENTER to
confirm.
13 EXIT Press to exit the on-screen menus.
14 Press to navigate the on-screen menus.
15 ENTER Pressing ENTER confirms your settings.
16 DISPLAY Press to display a variety of current
channel and input source information.
17 Red, green, In USB/SD mode, used in SD and USB
yellow, and function setup. Refer to "Using the USB
blue buttons storage and SD card reader" on page 8.
In TV mode, press to directly access four
presets from your Favorite List.
18 Press to display the SD/USB menu.
19 CLOCK Press to display the current time on the
screen.
20 HDMI Press repeatedly to cycle through the
available HDMI source inputs. Choices
include HDMI1, HDMI2, and HDMI3.
21 PICTURE Press to cycle through the available preset
picture modes. Choices include Vivid,
Normal, Cinema, Sport, and User.
22 ZOOM Press to cycle through the available aspect
ratios of the picture. Choices include
NORMAL, FULL, WIDE, and CINEMA.
23 In HDTV mode, press with 0~9 buttons to
select a digital sub-channel.
24 Press to change the channel.
CH /
25 FAVORITE Press to display your favorite channels list.
26 MENU Press to open the on-screen TV menus.
27 FREEZE Press to freeze the current picture. Press
again to resume normal viewing.
28 COLOR TEMP. Press to cycle through the available color
temperature presets. Choices include Cool,
Warm, and Normal.

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover on the back side of
the remote control.
2 Insert two 1.5 V AAA batteries into the
battery compartment. Make sure that you
match the + and – symbols on the batteries
with the + and – symbols in the battery
compartment.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
or to select the
9