Insignia NS-LCD19W-09 User Manual page 15

Insignia NS-LCD19W-09 19" LCD TV
3 Press CH+ or CH- to highlight a selection,
then press ENTER to initiate the scan or go
to the sub-menu (if available). Choices
include:
• Tuner—Lets you choose the source of
your TV signal. Press VOL+ or VOL- to
select Antenna or Cable, then press
ENTER to confirm.
• Channel Scan—Scans the TV signal
source for available channels, then puts
them into memory. Press ENTER to
initiate the scan. When the scan is
completed, the first program appears on
the screen.
• Channel Skip—Lets you specify
channels that you do not want shown on
your channel list. The channels are still
available by directly inputting the channel
number. Press ENTER to go to the
sub-menu. See "Skipping channels" on
page 15.
• Channel Label—Lets you name each
channel. Press ENTER to go to the
sub-menu. See "Labeling channels" on
page 15.
4 Press VOL+ or VOL- to adjust the setting.
5 Repeat Steps 3 and 4 to adjust the other
settings.
6 Press EXIT to close the menu and return to
normal viewing.
Skipping channels
To skip selected channels:
1 Press MENU on the remote control. The
on-screen menu appears.
2 Press CH+ or CH- to highlight the Channel
icon, then press ENTER to enter the Channel
menu.
3 Press CH+ or CH- to highlight Channel Skip,
then press ENTER to go to the sub-menu.
The Channel Skip sub-menu opens.
4 Press CH+ or CH- to select a channel
number to skip, then press ENTER to
confirm. A checkmark appears in the box.
5 Repeat step 4 to skip additional channels.
6 Press EXIT to close the menu and return to
Labeling channels
To label selected channels:
1 Press MENU on the remote control. The
2 Press CH+ or CH- to highlight the Channel
3 Press CH+ or CH- to highlight Channel
4 Press CH+ or CH- to highlight Channel
5 Press CH+ or CH- to highlight Channel
6 When you have selected the first character,
7 Repeat Steps 4 through 6 to label additional
8 Press EXIT to close the menu and return to
www.insignia-products.com
normal viewing.
on-screen menu appears.
icon, then press ENTER to enter the Channel
menu.
Label, then press ENTER to go to the
sub-menu. The Channel Label sub-menu
opens.
Index, then press INPUT repeatedly to select
a channel to label.
Label, then press INPUT repeatedly to select
the letter, number, or symbol you want.
press VOL+ to go to the next character (up to
a maximum of 10), then repeat Steps 5 and
6. When you finish the label, press ENTER to
confirm.
If you need to change a character you have
already entered, press VOL- to go to that
character.
channels.
normal viewing.
15