Advertisement
Table of Contents
Precautions
WARNINGS-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. THERE ARE NO USER SERVICEABLE PARTS
INSIDE-REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
Please read before using your power supply.
1) It is recommended that you return your power supply to RF Industries P/L (RFI) for any
service or repair. Incorrect assembly may result in electric shock or fire.
2) To reduce the risk of electric shock, unplug power supply from outlet before attempting any
maintenance or cleaning. Turning off controls will not reduce this risk.
3) An extension cord should not be used unless absolutely necessary. If an extension cord
must be used make sure that the pins on the plug are the same number, size and shape as
those of the original power supply plug.
4) Place the unit in an area that will allow air to flow freely around the unit. DO NOT block or
obstruct vent openings on the side/bottom of the unit.
5) Keep the unit away from moisture and water.
6) NEVER OPERATE UNITS IN PARALLEL
WARNING
Your power supply should be grounded to reduce the risk of electric shock. The power supply
is equipped with grounding conductor and grounding plug.
The cord must be plugged into an outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances. Never alter the AC cord of plug provided. Improp-
er connection can result in risk of electric shock.
DO NOT USE THE POWER SUPLY FOR DIRECT CHARGING OF BATTERY OR DIRECT
CONNECTION TO A BATTERY FOR BATTERY BACK-UP . (Please read the section on Battery
Back-up).
rfiwireless.com.au
2
3
3
3
4
5
6
6
2
Advertisement
