Test Selection - Panasonic CF-07 Service Manual

Parallel test
This tests the functions of the parallel port.
1. Only prior to executing the parallel port test should you change the setup contents to those shown below.
2. Connect the parallel loop back jig to the parallel port.
3. Choose Parallel test and press Enter.
4. After the test is finished, return the setup contents to default.
CD-ROM test
This tests the internal CD-ROM drive functions.
Choose CD-ROM test and press Enter.
LAN test
This test checks for existence of LAN device (LAN Port) on CF-07.
Test result : Device ID=2449.
Vender ID=8086
"OK"
Wireless LAN test
This test checks for existance of wireless LAN device on CF-07.
(This test is not executed on wireless communication for CF-VDW07)
If errors occur
For explanations of error messages, see Error Messages and Problem Categories (section 5.5).

4. Test Selection

Starting up the input menu
1. From the menu screen shown below, choose Quit and press Enter.
2. When A: \DIAG appears, input "JDG_07e" and press Enter.
3. The input screen shown below will appear.
To choose menu items, hold down "ALT" and press the selection key.
16-4