1. Manuals
  2. Brands
  3. Christie Manuals
  4. Computer Hardware
  5. TVC-700
  6. User manual

Christie TVC-700 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TVC-700
U s e r M a n u a l
020-100906-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TVC-700 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Christie TVC-700

Summary of Contents for Christie TVC-700

  • Page 1 TVC-700 U s e r M a n u a l 020-100906-01...
  • Page 3 TVC-700 U s e r M a n u a l 020-100906-01...
  • Page 4 Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the performance or use of this material.

  • Page 5: Table Of Contents

    ........7 Install TVC-700 ........9 Overview .
  • Page 6 Environment ........36 TVC-700 User Manual...

  • Page 7: Introduction

    MASTERSuite™ 5 disc that accompanies the TVC-700. Installation Guidelines The TVC-700 processor can be installed in a rack or tower orientation. Carefully read the following guidelines to make sure the processor can maintain optimum operation.

  • Page 8: Circuit Overloading

    • Sliding rail rack mounting kit (optional) • Accessories Box: • Christie MASTERSuite 5 software box with software CD • TVC-700 User Manual  (P/N: 020-100906-xx) • Operating System CD  ® (Windows 7 Ultimate) • Server Drivers Disk •...

  • Page 9: Control Panel

    The power button is used to apply or turn off the main system power. Turning off system power with this button removes the main power but keeps standby power supplied to the system. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 10: Control Panel Leds

    You should also check to make sure that the chassis covers are installed. Finally, verify that the heatsinks are installed properly. This LED will remain flashing or on as long as the indicated condition exists. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 11: Drive Carrier Leds

    This LED should be off when the system is operating normally. Drive Carrier LEDs The TVC-700 uses SATA drives. Each drive carrier has 2 LEDs: • Green: When illuminated, the green LED on the SATA drive carrier indicates drive activity.

  • Page 12: Safety Warnings And Guidelines

    Failure to comply could result in death or serious injury. General Safety Precautions • Keep the area around the TVC-700 clean and free of clutter. • The TVC-700 weighs approximately 72 lbs (32.7 kg.) when fully loaded. When lifting the system, 2 people at either end should lift slowly with their feet spread out to distribute the weight.

  • Page 13: Operating Precautions

    Failure to comply may result in equipment damage. Contact Support If you encounter problems with the TVC-700 processor and require assistance, contact Technical Support at www.christiedigital.com. In North America, call toll free 1-800-221-8025. Enter the information in the table below and keep with your records for future reference.
  • Page 14 Introduction TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 15: Install Tvc-700

    Unpack the System You should inspect the box the TVC-700 shipped in and note if it was damaged in any way. Decide on a suitable location for setting up and operating the TVC-700.

  • Page 16: Warnings And Precautions

    • Install the heaviest components on the bottom of the rack first, and then work up. • The TVC-700 weighs approximately 72 lbs. (32.7 kg) when fully loaded. When lifting the system, 2 people at either end should lift slowly with their feet spread out to distribute the weight.

  • Page 17: Rack Mounting Considerations

    A reliable ground must be maintained at all times. To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e. the use of power strips, etc.). TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 18: Install The System Into A Rack (Optional)

    The chassis is shipped with the chassis cover pre-installed. Although the processor is shipped with the feet not installed, you may have previously installed the feet to set up the TVC-700 in tower mode. Both the feet and cover must be removed before installing the rails.

  • Page 19: Identify The Sections Of The Rack Rails

    Each assembly consists of two sections: an inner fixed chassis rail that secures directly to the chassis and an outer fixed rack rail that secures directly to the rack itself. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)
  • Page 20 Install TVC-700 Inner rails Chassis handle TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 21: Install The Chassis Handles And Inner Rails

    5. Align the inner rails against the chassis, as shown. Confirm that the rails are flushed against the edge of the chassis. 6. Tighten the screws. Do not over-tighten. 7. Repeat steps 5 and 6 with the other inner rail. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 22: Install The Outer Rails To The Rack

    3. Secure the rear of the outer rail with two M5 screws and the rear of the rack. Note that the outer rail is adjustable from approximately 26” to 38.25”. 4. Repeat steps 1-3 for the left outer rail. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 23: Install The Chassis Into A Rack

    Convert Chassis to Tower (Optional) The TVC-700 processor is shipped with the chassis cover pre-installed, but with the chassis feet packaged separately. To use the chassis in a desktop or tower orientation, follow the instructions in this section.

  • Page 24: Install Chassis Cover

    The cover should overhang approximately one-half inch over the front of the chassis. 3. Slide the chassis cover toward the rear of the chassis to lock the cover into place. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 25: Install Feet On The Chassis

    The foot should lock into place into both foot receptacles. 2. Secure the foot to the chassis using 2 screws enclosed in the packaging. 3. Repeat steps 1 and 2 for the other chassis foot. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)
  • Page 26 Install TVC-700 TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 27: Connect The Processor

    All input and display modules are clearly labeled. Connect Devices Input and display modules are already installed in the TVC-700 chassis. Input Signals The system will accept input signals of the following types: •...
  • Page 28 (5 wire)1, 2, 3 RGB with composite Green Blue Comp No Signal sync (4 wire)1, 2, 3, Sync 4, 5 RGB with sync-on- Green Blue No signal No signal green (3 wire) 4,5 with sync TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)
  • Page 29 2 DB26 connectors. Video sources are connected to the module via a DB26 to 16-way BNC splitter cable connected to the top port on the module. The bottom port is not used. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 30: Output Signals

    S-Video Luma Chroma Output Signals The output of the TVC-700 processor is through a Mini DisplayPort connection. Each output drives up to WUXGA resolution at 60 Hz. Refresh rates of 60-75 Hz will be available for SXGA+ resolution. Mini DisplayPort to DVI-D adapters are provided (6 per display card in your configuration);...

  • Page 31: Connect Ethernet

    3. Connect the other end of each DVI-D cable to your display devices. 4. Power up the display devices. 5. Power up the processor. For details, refer to Turn the Processor On, on page 2-27. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 32: Connect Peripheral Devices

    AC inlet of the power supply on the rear panel and connect the 3- pronged end of the line cords to a grounded AC outlet. The input voltage must be capable of 100-240 VAC, 60/50 Hz, 4A. The TVC-700 processor comes standard with 2 hot plug redundant power supplies.

  • Page 33: Turn The Processor On

    Turn the Processor On To power up the processor and initialize the input and display modules: 1. Press the Power button on the front panel. The TVC-700 processor powers on.  2. Wait until the operating system cycles through its initialization process.

  • Page 34: Turn The Processor Off

    1. Close all applications. 2. Shut down Windows by selecting Start > Shutdown. 3. Windows shuts down and the processor enters STANDBY POWER mode. The system power LED changes to amber. TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 35: Specifications

    2x USB 2.0 (front) ports 1x Fast UART 16550 serial (rear) port 6x 2.5mm audio ports 1x VGA port 2x PS/2 ports Maximum dimensions 673mm (26.5”) by 452mm (17.8”) x 178mm (7.0”) Maximum weight 34.0kg (75 lbs.) TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 36: Power Requirements

    PCI Express Gen3 x16 Form Factor Full height, half length Graphics Memory 2GB GDDR5 Connectors 6 mDP connectors per card Number of Output Channels 6 per card Display Port Protocol Max Power Consumption DirectX OpenGL TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 37: Standard Video Capture

    NTSC M, J, N, 4.43 50/60; PAL I, B, D, G, H, M, N, NC, 4.43 60; SECAM B, D, G, K, L, LD Form Factor Full height, half length Wall Placement Anywhere on the display wall TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 38: Dual Link Dvi-D Video Capture

    Max. Data Rate 650 MB/s Supported Color Depth 16-bit and 32-bit per pixel Wall Placement Anywhere on the display wall HDCP Not supported TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 39: Single Link Dvi-I Video Capture

    Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal Max. Data Rate 650 MB/s Video Bus PCI Express Wall Placement Anywhere on the display wall HDCP Not supported TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 40: Safety

    Number of Inputs Frames Per Second 1920x1200 1920x1200 1280x1024 1280x1024 1280x1024 Safety • CAN/CSA C22.2 No. 60950-1-07 2nd Edition • UL 60950-1 2nd Edition • IEC 60950-1:2005, 2nd Edition • EN60950:2006 + A11:2009 TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)

  • Page 41: Electro-Magnetic Compatibility

    CISPR 24 / EN55024 EMC Requirements - Information Technology Equipment Marking The TVC-700 is designed to comply with the rules and regulations required for the product to be sold in various regional markets, including; USA/Canada, European Union, Australia/New Zealand, Kuwait, China, Korea, Japan, Mexico, Ukraine, Russia, South Africa, and Saudi Arabia.

  • Page 42: Environment

    8% to 90% non- condensing Shipping Shock (Single event Half-sine: 160cm/s, 2- only) 3ms (~100g) Square: 422cm/s, 20g Altitude 0 to 9,144m (30 000 ft) max. Vibration (random, 2.0g (rms), 10 to 500Hz non-continuous) TVC-700 User Manual 020-100906-01 Rev. 1 (03/13)
  • Page 43 *000-103463-01* ASSY TECH DOCS TVC-700...
  • Page 44 United Kingdom Eastern Europe Singapore Japan ph: +44 118 977 8000 ph: +36 (0) 1 47 48 100 ph: +65 6877-8737 ph: 81-3-3599-7481 France Middle East Beijing South Korea ph: +33 (0) 1 41 21 00 36 ph: +971 (0) 4 299 7575 ph: +86 10 6561 0240 ph: +82 2 702 1601 Germany...

Table of Contents