Advertisement
2
Connect receiver and controller
GameCube
™
1. Insert the receiver's GameCube plug into the socket
on the Gamecube or Wii console.
2. Turn on the controller. The controller's RX LED
flashes and the receiver's RX LED lights up steadily.
Wii classic
1. Insert the receiver's Nunchuk plug into the external
extension connector of the remote.
2. Turn on the controller. The controller's RX LED
flashes and the receiver's RX LED lights up steadily.
Manual connection
If the controller does not automatically connect to the
receiver, follow these steps to connect manually.
1. Press CONNECT on the receiver. The RX LED
flashes quickly.
2. Press the START and LZ buttons on the controller at
the same time until the RX LED lights up steadily.
and Wii
™
- or -
- or -
CONNECT
3
RX LED
Advertisement
