Summary of Contents for King Canada 8500BVM
- Page 1 3-IN-1 VARIABLE SPEED BLOWER/VACUUM/MULCHER MODEL: 8500BVM INSTRUCTION MANUAL COPYRIGHT © 2010 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
-
Page 2: Warranty Information
LIMITED TOOL WARRANTY King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in materials. - Page 3 GENERAL & SPECIFIC SAFETY INSTRUCTIONS FOR BLOWER/VACUUM/MULCHER 1. KNOW YOUR TOOL watch) which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair. Read and understand the owners manual and labels affixed to the Roll up long sleeves above the elbows.
- Page 4 12. On/Off switch. 5. Power cord (polarized). 6. Blower air inlet safety guard. To operate in blower mode, it must be installed to the blower air inlet. MODEL 8500BVM Air speed range 180-320 Km/h (112-200 MPH) Air volume range 110-350 CFM...
- Page 5 ELECTRICAL INFORMATION WARNING! ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THIS POWER TOOL DISCONNECTED FROM THE POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! POWER SUPPLY Polarized power outlet...
- Page 6 ASSEMBLY BLOWER MODE Align the grooves on the blower tube (A) Fig.4 with the grooves on the blower outlet (B). Push the blower tube onto the blower outlet until it clicks into position. Warning! The blower inlet and outlet both have a built-in limit switch which prevents the blower from starting if the blower tube (A) and the blower inlet safety guard (C) are not installed or not installed properly.
- Page 7 OPERATION STARTING AND STOPPING Refer to the Electrical Information page for the installation and connection of the power cord. Warning! To avoid serious personal injury, always wear safety glasses. Wear a facial mask in dusty locations and wear appropriate clothing such as boots, gloves, long pants and long-sleeved shirt.
- Page 8 Do not store the tool on or adjacent to fertilizers or chemicals. Such storage can cause rapid corrosion of the metal parts. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
Need help?
Do you have a question about the 8500BVM and is the answer not in the manual?
Questions and answers