Panasonic AJ-D910WB Operating Instructions Manual page 90

CONTENTS
Setup Card Operations
When data is not written
If the following error messages appear when the UP button is pressed in step 7, the data is not
written.
Data format error messages
Error message
WRITE PROTECT The write protect switch on
the side of the card is set
to ON.
NO CARD A setup card is not
inserted.
ERROR The disk cannot be
formatted.
– 90 (E) –
Condition Countermeasure
Set the write protect switch
on the side of the card to
OFF.
Insert a card.
The card may be
defective. Replace the
card.