Panasonic HDC-SD41 Operating Instructions Manual page 97

Problem
Object seems to be
warped.
Problem
Any scenes/still pictures
cannot be played back.
Scenes cannot be
deleted.
Problem
Video or audio is not
output even though it is
connected to TV
correctly.
The images are
squeezed horizontally.
If the SD card is inserted
in another device, it is
not recognised.
When connected by the
USB cable, this unit is
not detected by the other
devices.
Recording
≥ Object seems to be warped slightly when the object
moves across the image very fast, but this is because the
unit is using MOS for the image sensor. This is not a
malfunction.
Playback
≥ Any scenes/still pictures where the thumbnails are
displayed as
≥ Release the protect setting. (l 65)
≥ Any scenes/still pictures where the thumbnails are
displayed as
pictures are unnecessary, format the media to erase the
data. (l 37) Please be aware that if a media is formatted
then all the data recorded on the media is erased and
cannot be recovered. Back up important data on a PC,
disc etc.
With other products
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (l 68)
≥ Change the setting of the unit depending on the cable
connecting to the TV. (l 69)
≥ TV screen is not displayed during recording or when
PRE-REC is set. Check on the screen of the unit. Also,
audio is not output from the TV during recording mode.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card/
SDXC Memory Card) that you inserted. Refer to the
operating instructions of the device for details.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
Check points
Check points
cannot be played back.
cannot be deleted. If the scenes/still
Check points
97
VQT3K06