Advertisement
Identifying the parts
1.
Power Cord and Plug
2.
Control Connector
3.
Temperature Selector Dial
4.
Indicator Lamp
5.
Appliance Inlet
6.
Heating Shield
7.
Handle with Foot Moulding
8.
Hotplate
9.
Glass Lid
9
How to use
Before Operation: insert the Control Connector 2 firmly as far as it will go into
the Skillet's Appliance Inlet 5 , leaving the Temperature Indicator 3 set below the
Minimum mark - turn it anti-clockwise as far as it will go. Then insert the Power Cord Plug
1 into the mains socket. (The Electric Frypan may emit abnormal smells when used for
the first time - they are not hazardous and will disappear after a few minutes). When
cooled wipe the hotplate with a damp cloth.
Automatic Temperature Regulator on Control Connector:
1.
The thermostat can be adjusted from minimum to maximum by setting the
Temperature Selector Dial 3 from 1 to 5, to suit the type of meal to be prepared.
2.
Once the desired temperature has been reached, the thermostat's indicator lamp 4
will turn off automatically; it will light again when temperature falls below the setting
selected.
3.
Always use the Lid 9 when cooking.
Cooking Tips
•
Very little fat is necessary during cooking because of the Non-Stick pan coating - it is
better to marinade the food or lightly brush it with oil before cooking than add oil or
fat to the pan.
•
When the food is ready, reduce the Temperature Selector Dial 3 to MIN. If you wish
to keep the food warm, lower the Temperature Selector Dial to 1.
Electric Skillet
Suggested Thermostat Settings
These are offered only as a guide:
cooking times will vary according to your
preferences and individual foods.
Food
Croissant,
bagel
warming
8
Eggs over
easy
7
Plain omelette 1-2 mins.
6
5
Toasted
4
3
cheese
2
Cut potatoes,
6mm / ¼"
thickness
Sausages
1
Prepared
vegetables:
Peppers,
tomatoes,
onions,
mushrooms,
courgettes
etc.
Fish steaks*
Lamb, pork
chops
Langoustines
& similar*
*If frozen refer to instructions on pack
Cleaning and Maintenance
Care of the Non-Stick surface
1.
When cool after use, clean the cooking
surface with a cloth or kitchen paper
made damp with warm soapy water.
Time
Dial
When dry apply a little cooking oil to
3 mins.
1
condition the surface. NEVER IMMERSE
per side
up to 85°C
THE SKILLET IN WATER. Burnt-on
foods, when cooled, are best soaked
1½ min.
3
with soapy water from a wad of kitchen
per side
up to 145°C
towel until they soften.
3
2.
Do not use metal-tipped kitchen
per side
up to 145°C
tools - wooden or plastic tools are
1½ mins.
3
recommended.
per side
up to 145°C
3.
Do not use harsh or abrasive
10 mins.
4
detergents.
turned
up to 170°C
4.
If you have to cut food during cooking,
we recommend you take the food out
12-15
4
of the Electric Skillet and cut it on a
mins.
up to 170°C
board.
turned
5.
Do not pour soapy water into the Skillet
5 mins.
4
while it is hot.
per side
up to 170°C
Control connector cleaning instructions:
•
Clean with dry kitchen paper.
•
Do not clean the inlet 5 with damp
cloths - it must be kept dry at all times.
3-5 mins
4
per side
up to 170°C
5-7 mins
5
per side
up to 170°C
2-3 mins
5
per side
up to 170°C
Electric Skillet
Cautions
•
The Pan (Hotplate 8 ) and Lid 9 will
•
become HOT during use: always use
Ensure the Electric Skillet Voltage and
Oven Gloves and use the side handles
Power details match your home Supply.
7 when handling the hot Electric
•
Do not plug-in to the socket, or operate
Skillet.
with wet hands - or allow the Power
•
Ensure that the Plug, Power Cord,
Cord and Plug to get wet.
Control Connector and Appliance Inlet
•
Do not operate the Electric Skillet if the
are kept totally dry, both in use and in
Power Cord 1 has become damaged
storage.
- contact Judge Customer Services at
•
When removing the Mains Plug 1
the address given under the Warranty
or the Control Connector 2 hold the
details.
actual Plug or Connector itself - do not
•
pull on the cord.
Do not touch the underside of the
•
Electric Skillet, which becomes very
The metal rod protruding from the
hot. USE OVEN GLOVES and use only
Control Connector 2 body will be HOT
when removed from the Appliance Inlet
the side handles 7 when moving and
handling the hot Skillet.
5 .
•
•
Never use Components that differ
Beware damage to precious surfaces
from those originally supplied. Only the
when using the Electric Skillet to
Control Connector 2 as supplied must
Serve at the table.
be used.
•
Do not let the Power Cord 1 trail
•
The Power Cord 1 must be must
within the reach of children.
be kept away from hot surfaces and
•
Ensure the Power Cord 1 is not
the Skillet must not be used near
allowed to touch the hot surface of
flammable objects such as curtains, or
the Electric Skillet, or any other heated
on carpet , combustible mats, plastic
object.
table cloths or similar. Protect precious
surfaces.
•
The Electric Skillet is not intended for
•
Site the Electric Skillet on a level and
use by children or the elderly and infirm
stable surface.
without supervision.
•
•
Keep a minimum distance of 15cm
Do not let children play with the Electric
between the Electric Skillet and walls;
Skillet.
the Skillet stands on legs which holds
•
Never leave unattended when heating.
the protective cover for the heating
•
element 1cm above the work surface or
Always disconnect the Electric Skillet
table: this must not be reduced.
from the Mains supply when not in use.
•
•
To prevent hazards, a damaged power
The Electric Skillet must be unplugged
cord 1 must be repaired only by an
and allowed to cool before cleaning.
authorised electrician. If in doubt,
•
Never immerse the Electric Skillet in
contact Judge Customer Services.
water.
•
The Control Connector 2 must be
•
Do not use this Electric Skillet if it
removed before the Skillet is cleaned.
is malfunctioning: contact Judge
•
This appliance is not intended be
Customer Services at the address given
operated by means of an external timer
under the Warranty details.
or a separate remote-control system.
Cautions (Continued)
Electric Skillet
Advertisement
