Page 1
INFRARED ZONE HEATING SYSTEM OWNER’S MANUAL Model No. SND-6-ECO...
Page 2
WARNING: READ THIS ENTIRE OWNER’S MANUAL CAREFULLY BEFORE USE. Thank you for choosing an SND Infrared Zone Heating System. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS, AND FAQ’s BEFORE USING THE HEATER WARNING! ! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
Page 4
9. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations, nor any locations that use GFCI outlets. 10. Never place heater where it may fall into a bathtub or other water receptacles. 11. Do not run cord under carpet. Do not cover cord with throw rugs, runners, or similar coverings.
The life expectancy of the heating elements is typically 25,000 hours. Heating elements may be replaced by obtaining parts from SND Products, although it is not recommended (unless you are a certified heater technician or authorized directly by SND). All parts may be purchased through SND PRODUCTS if your product is out of warranty.
Page 6
Why doesn’t the temperature on my heater match the temperature display on my wall, or external thermostat? This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat).
Page 7
I purchased my heater so that it could cut my heating costs, but my electric bill has gone up. Why? The compact SND heater can definitely save you on heating costs, when compared to the existing central heating system in place in your home, and when used as directed. Your heater is designed to give your main heat source a supplement “boost,”...
SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 1000W/1500W Unit Size in. (W) x 20 in. (D) x 17 in. (H) Unit Weight 38.8 lbs SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off.
IN THE BOX INFRARED ZONE HEATING SYSTEM REMOTE CONTROL BATTERY INSTRUCTION BOOKLET INSTRUCTION BOOKLET REMOTE CONTROL PRODUCT DIAGRAM Remote Control Wooden Cabinet Power Mode Temp. Up Air Outlet Temp. Down Timer Cord Clamp Control Panel Power Mode Temp.
Fig. 1 Remote Control Mode button: Used for mode selection ON/OFF button: Powers the display on and off Temp up button: To increase desired temperature Temp down button: To decrease desired temperature Timer button: Used to engage timer mode and to set hour value for the timer...
Page 11
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120V (15 amp minimum dedicated circuit) 60Hz power outlet. Only operate heater in upright position with caster wheels attached. When using remote control, please pull out the insulating film as the following steps. Insulating film Remote control Battery cover...
OPERATING INSTRUCTIONS 1. Power the Display On/Off and Select Desired Mode Turn the heater on by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control. Turn the heater off by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control.
Page 13
3. Setting the Function POWER-OFF TIMER Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and can only be set while the heater’s display is in the “On” position. Turn the heater to the “On” position. Press the Timer button on the heater’s control panel or the remote.
Page 14
5. Setting Electro Lock The Electro Lock can help avoid the heater from being accidentally engaged by children. The locking mechanism can be set in both the ON and OFF modes. Press Temp Up and Temp Down buttons at the same time for 3 seconds.
MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
STORAGE Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. BASIC TROUBLESHOOTING If the heater will not operate, please check the following before seeking repair advice: 1.
SND warranty department. The purchaser may also opt to ship the product to SND to have it repaired. The purchaser will be responsible to prepay any shipping charges (both ways), export taxes, custom duties and taxes, or any other charges associated with the transportation of the unit.
Protectors/GFCI Disclaimers SND shall not be liable for any loss due to use (or misuse) of the heater or other SND products or other incidental or consequential costs, expense or damages without irrefutable foundations. Under no circumstances shall SND or any of its representatives be held liable for injury to any person or damage to any property, however arising.
Page 19
Describe the issue and symptoms you have for, and about the product. A certified SND Technical Support agent will give you an evaluation of your issue and your resolution options. If the answer is not available at that time, you will be referred to the appropriate channels, or given a call/e-mail back within 72 hours with an answer or resolution.
Need help?
Do you have a question about the SND-6-ECO and is the answer not in the manual?
Questions and answers