Advertisement
OPERATION & MAINTENANCE
WARNING!: To reduce the risk of serious personal injury, read, understand and follow all
important safety warnings and instructions prior to using this tool.
Getting to know your Impact Wrench
1. Forward/Reverse Rocker Switch
2. Body
3. Gear Housing
4. Handle
5. Brush Cap
6. Anvil
OPERATING INSTRUCTIONS
This impact wrench is equipped with a rocker switch that switches rotation from forward
to reverse, allowing fasteners to be broken loose. Pressing the lower part of the switch
causes the impact wrench to move forward; pressing the upper part of the switch causes
the rotation to reverse.
MAINTENANCE
This impact wrench will require lubrication after 30 continuous hours or 50 intermittent
hours of use. Refer to the parts diagram or contact an approved service center for
lubrication services.
NOTE: UNPLUG WRENCH BEFORE INSPECTING BRUSHES!
The brushes should be inspected periodically. Unscrew plastic caps located on the sides of
the motor housing to reveal the spring and brush assembly.
Keep brushes clean and freely sliding. Symbols are inscribed on the brushes, and if it is
worn down to the line closest to the spring, replace immediately.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustments should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts listed in this instruction manual.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram
and parts list.
Advertisement
