Advertisement
SAFETY PRECAUTIONS
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN YOUR WLM
SONATA. THERE ARE NO USER SERVICEABLE PARTS INSIDE. PLEASE
CONTACT YOUR DEALER/DISTRIBUTOR IF THERE IS EVER NEED FOR
SERVICE.
1) Read this User's Manual and refer to it frequently during use of this product - All the safety
and operating instructions should be read before the product is operated.
2) Retain this User's Manual - The safety and operating instructions contained in this manual
should be retained for future reference.
3) Follow Instructions – All operating procedures and instructions should be closely followed.
4) Power Sources - This product should be operated using only the type of power source specified on
the label next to the power input connector.
5) Grounding - This product is equipped with a three prong IEC connector. Always use a power cord
and an electrical outlet that is properly grounded. If you do not know whether the outlet is grounded,
consult your electrician or local power company.
6) Power Cord Protection – Power supply cords should be routed so that they are not likely to be
walked on or pinched. Always use power cords with adequate current ratings and safety certifications
(UL, CE, TÜV, CSA, etc.)
7) Fuses - For continued protection against fire hazard, replace fuses with the same type and rating of
the fuses specified. When changing fuses, completely unplug the AC cord from the wall outlet.
8) Tubes - During operation the tubes get very hot. Do not touch the tubes since this may result in a
severe burn. Allow at least 15 minutes after removing power for tubes to cool down before touching
them.
9) Turn-off when not using - Turn off the unit as soon as you stop actively using it. Unplug the power
cord from the wall during a lightning storm or when the product is to be left unattended and unused for
longer periods of time.
Advertisement
