Summary of Contents for KUULAIRE KA12
- Page 13 CSD KuulAire Service Manual – KA12 & KA15 1. How to replace cooling pad: W ARNING – Before servicing, remove the unit from power source by unplugging power supply cord from power outlet Required Tool – Phillips head screw driver (Phillips head screw driver long (12”+) with magnetized tip) 1.1.
- Page 14 CSD KuulAire Service Manual – KA12 & KA15 c. Remove, pad retainer piece in the bottom from the pad assembly by gently bending the snap-fit tabs. Pad retainer Slightly bend the snap-fit tab each side to get the pad retainer loose d.
- Page 15 CSD KuulAire Service Manual – KA12 & KA15 1.2. Front pad a. Remove rear pad assembly – see procedure 5.1. b. Remove four (4) screws in the front bottom – may have to lay down the unit on its back c.
Need help?
Do you have a question about the KA12 and is the answer not in the manual?
Questions and answers