Listening To The Fm Radio; Tuning In A Station; Presetting Stations; Tune To A Preset Radio Station - Soundstream H-500Di Instruction Manual

Listening to the FM Radio

Tuning in a Station

1
Ensure that you have connected and fully
extended the FM antenna.
2
Press the TUNER button to select the TUNER
source.
3
Press and hold the H
frequency changes down or up automatically
until a station is found. Or press and hold H
G buttons repeatedly until you find the station
you want.
Note:
- Press and hold
BF
control to change grid.
- The unit will automatically switch the Stereo or
MONO channel to receive the FM radio mode, it
can get the best effect.

Presetting Stations

You can preset up to 20 FM stations.
Program radio stations automatically

Press and hold the PROG button for 2 seconds
to activate automatic programming. All available
stations are programmed in the order of
waveband reception strength.
- The first programed radio station is played
automatically.
Program radio stations manually

1
Tune in the desired station, then press the
PROG button.
2
Press the 0~9, or

the preset number.
3
Press the PROG button to store the station.
4
Repeat above steps 1 to 3 for each station you
want to store in memory with a preset number.
5
Press and hold the L button to erase the
memory radio stations.
Note:
If the system is unplugged or if a power failure
occurs, the preset stations will not be erased.

Tune to a Preset Radio Station

Press the or buttons to select a preset
 

number that you want.
Note:
You can also use the numerical keypad to
select a preset station directly.
G buttons, the
/
button on the remote
buttons to select


Other features

Set the Alarm Timer

In standby mode, you can use the daily timer setting
to turn the unit on automatically at a certain time ev-
eryday. The clock must be set correctly for the timer
function to work.
1
In standby mode, press and hold the TIMER
button for several seconds, then press
button to select an alarm sound source.
2
/ Press the TIMER or ENTER button , volume
indicator will blink. Set the alarm volume with the
button or

3
Press the TIMER or ENTER button , hour
indicator will blink. Set the hour with the
or button.

4
Press the ENTER or TIMER button, minute
indicator will blink. Set the minute with the
button or
5
Press the ENTER or TIMER button or ENTER
button, the selected time is set.
6
Set the daily timer to "ON" (daily timer set is
in effect) or "OFF" (daily timer is disabled)
with the button or

Note:
* The operating time of each step should be
no longer than 15 seconds or it will return to time
display.

Set the Sleep Timer

Use the sleep timer to turn the system off after a
certain number of minutes when in play mode. By
setting the sleep timer, you can fall asleep to music
knowing that your system will turn off by itself rather
than play all night.
-
After the unit powers on, you can set the sleep
timer by pressing the SLEEP/TIMER button
repeatedly, select a desired period of time (in
minutes). The unit turns off automatically
after the set period of time.
16
button.

button.

button.

/
 
button

