Harman Kardon AVR 1600 Service Manual page 111

5 x 40w 7.1 channel a/v receiver
Hide thumbs Also See for AVR 1600:
Table of Contents

Advertisement

AVR1600
(2)
On Chip program memory and data memory
(3)
16-bit timer
(4)
Real time clock (RTC)
(5)
Watchdog timer
(6)
General-purpose serial interface
(7)
Serial bus interface
(8)
CEC
(9)
Remote control signal preprocessor
(10) 10-bit A/D converter
(11) Interrupt source
(12) Input/ output ports
Product name
On chip Flash ROM
T5CN5
16-bit interval timer mode
16-bit event counter mode
16-bit PPG output
Input capture function
Clock (hour, minute and second)
Calendar (Month, week, date and leap year)
Time correction
or
Alarm (Alarm output)
Alarm interrupt
26 cycles of binary counter
Watchdog timer out
Either UART mode or synchronous mode can be selected (4byte FIFO equipped)
Either I
C bus mode or synchronous mode can be selected.
2
Transmission and reception per
Can receive up to 72bit data at a time
Start by an internal or external timer trigger
Fixed channel/scan mode
Single/repeat mode
AD monitoring 2ch
Conversion speed 1.15usec(@fsys = 40MHz)
Internal: 42 factors...The order of precedence can be set over 7 levels (except the watchdog
timer interrupt).
External: 8 factors...The order of precedence can be set over 7 levels.
79 pins
On chip RAM
512Kbyte
32Kbyte
: 10 channels
: 1 channel
30 seconds (by software)
: 1 channel
: 3 channels
: 1 channel
byte.
: 2 channels
111
harman/kardon
: 3 channels
: 12 channels
T5CN5

Advertisement

Table of Contents
loading

Table of Contents