Table of Contents
Advertisement
Ultrasonic Digital Humidifier
Parts & Contents
1
4
1. Mist Nozzle
2. Top Tank Handle
3. Water Tank
4. Base
5. Control Panel
6. Air Outlet
2
3
5
10. Cleaning Brush
11. Ceramic Water Filter
12. Tank Cap
13. Bottom Tank Handle
2
7. Water Sensor
8. Water Reservoir
9. Ultrasonic Nebulizer
1
6
8
7
10
9
4
11
12
13
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MH-505 and is the answer not in the manual?
Questions and answers
knocked it over now not blowing
If your Air Innovations MH-505 stopped blowing after being knocked over, follow these steps:
1. Check for Damage: Inspect the humidifier for visible damage. If it appears damaged, do not use it.
2. Reassemble Properly: Ensure the unit is fully and correctly assembled, as it only operates when fully assembled.
3. Check Blower Operation:
- Ensure the blower is functioning. If not, it may need servicing.
4. Inspect the Water Tank:
- Refill the tank if it is empty.
- Ensure the tank is correctly seated on the base.
5. Clean the Nebulizer and Water Sensor:
- White dust or residue may block these components. Clean them per the manual’s instructions.
6. Check Power:
- Ensure the unit is plugged in and the outlet is functioning.
- Press the POWER button to turn it on.
If the issue persists after these steps, contact Air Innovations for further assistance. You can reach them toll-free at 844-600-1370 or via email at sales@air-innovations.com.
This answer is automatically generated
Did the mh-501 replace mh-401? Will the ceramic filter fit mh-401