Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Regulus MT3551
- Page 1 REGULUS Stereo Wireless Headset MT3551 Instruction Manual...
-
Page 2: Table Of Contents
Index Introduction Thank you for choosing our 2.4G wireless headphones Introduction ....................2 product. These 2.4G Wireless Headphones on your hands Package Contents ..................2 have been designed for receiving wireless high-quality Connectors and Controls ................ 3 Headphones ....................3 stereo sound from audio playback devices. -
Page 3: Connectors And Controls
8. Headphones power indicator Connectors and Controls 9. Power source DC1/DC2 selection switch 10. Headphones On/Off button Headphones 11. Removable ear cushion pad with battery compartment Transmitter cradle (Back Panel) 12. Power socket 13. Transmitter cradle audio input socket 14. “SCAN” synchronisation button 15. -
Page 4: Transmitter Cradle (Front And Top)
Transmitter cradle (Front and Top) LED Indicators on the Headphones The headphones have two LED indicators: the power in- dicator (8) and the radio and RF reception indicator. The following table contains a description of their meaning depending on their colour and status: LED indicator Status Description... -
Page 5: Transmitter Cradle Led Indicators
Transmitter cradle LED Indicators Getting Started The transmitter cradle has two LED indicators: the power/ Connecting the Transmitter Cradle charging indicator (18) and the RF send indicator. The fol- lowing table contains: To connect to hi-fi equipment, use one of the supplied au- dio cables. -
Page 6: Charging The Battery Of The Wireless
Charging the Battery of the Wireless Powering the Headphones On/Off Headphones If the battery level of the headphones is high enough (the power and charge indicator (12) on the transmitter must Please charge the battery before using the product for the be green), you may remove the headphones from the fi rst time. -
Page 7: Powering The Transmitter Cradle Off
establish a connection with the headphones. Synchroniz- 2. Power on the connected audio source and start play- ing the Headphones and Transmitter Cradle. back. The send indicator (17) on the transmitter cradle should light up green. Synchronizing the transmitter cradle and the headphones 3. -
Page 8: Receiving Radio Stations
If you have connected your headphones to an external au- The last tuned-in station will not be saved when changing dio source, you may also adjust the volume directly on the the operating mode or after powering the headphones off . audio source (e.g. -
Page 9: Battery Operation
Battery operation The ear cushion is fi xed on a plastic frame. You need to remove this frame from the locking mechanism together You may power both the transmitter cradle and the head- with the ear cushion. Do not pull on the ear cushion itself. phones usingrechargeable or conventional batteries (only 3. -
Page 10: Appendix
1. Remove any cable connections and turn the transmitter Appendix cradle upside down, holding it in your hand. 2. Open the battery compartment by sliding the lock of Troubleshooting the compartment cover into the direction of the com- You can solve most common problems yourself by using partment. -
Page 11: Technical Specifi Cations
Sound is interrupted or noisy. Connectors 1 x stereo Audio-In 3.5 mm ■ The rechargeable battery or the inserted batteries of the and ports jack (headphones) headphones are depleted. Recharge the internal battery 1 x stereo Audio-In 3.5 mm or replace the batteries with new batteries of the same jack (transmitter) type.
Need help?
Do you have a question about the MT3551 and is the answer not in the manual?
Questions and answers