1. Manuals
  2. Brands
  3. Vizion Manuals
  4. Security Camera
  5. Raptor II
  6. Instruction manual

Vizion Raptor II Instruction Manual

Ruggedized ptz
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Raptor II Ruggedized PTZ

Instruction Manual

version 2.1
Please read this manual carefully before installation and operation of the product.

Advertisement

Table of Contents
loading

Summary of Contents for Vizion Raptor II

  • Page 1: Instruction Manual

    Raptor II Ruggedized PTZ Instruction Manual version 2.1 Please read this manual carefully before installation and operation of the product.

  • Page 2: Table Of Contents

    Table of Contents Introduction ----------------------------------------------------------------------------- 4 Safety Warning ------------------------------------------------------------------------ 5 Packing List ----------------------------------------------------------------------------- 7 4. Mounting ---------------------------------------------------------------------------------- 8 ■ Mounting Options (UK_Column Mounting) ■ Offset Mounting ■ WIPER SET CHANGE ■ CABLE14PIN Connection 5. Telemetry Control ------------------------------------------------------------------- 12 ■ On-Board Protocols ■...
  • Page 3 • AE • DAY & NIGHT • SPECIAL • EXIT ■ AUTOSEQ SET • PRESET • TOUR • SCAN • PATTERN • AUTO PAN • AUTO RUN • EXIT ■ ZONE SET • AREA SEL • AREA DEFINE • AREA COLOR •...
  • Page 4 • POWER ON RESET • PAN / TILT INIT • CAMERA INIT • AUTO SEQ INIT • PRIVACY ZONE INIT • FACTORY INIT • EXIT 7. Specification ------------------------------------------------------------------------ 44 8. Dimensions -------------------------------------------------------------------------- 46 VHT Raptor Manual Ver. 3.1 June 2012...

  • Page 5: Introduction

    1. Introduction This unit is designed to provide clear video under all circumstances. Robust mechanism with the latest technology realized an excellent auto-focus control technology during PTZ operation a long time, an exact location control after preset operation and high-speed zoom and auto focus capabilities for shooting a moving objects.

  • Page 6: Safety Warning

    2. Safety Warning * The purpose of this information is to ensure proper use of this product and to prevent danger to damage to persons and property. Please observe all precautions. * The precautions are divided into “Warnings” and “Cautions” as distinguished by the symbols shown below;...
  • Page 7 Do not install the unit in humid or dusty locations. Doing so may cause a fire or electrical shock. If any unusual smells or smoke come from the unit, stop using the product immediately, disconnect the camera from the power source and contact your distributor If this product fails to operate normally, contact your distributor.

  • Page 8: Packing List

    3. Packing List Wide Dynamic X36 Zoom Instruction Manual Rugged PTZ Camera 1EA Hex Bolt / Nylon Nut / Spring Washer / Plate Washer -M8x35 (SUS) 4PCS Option (UK_Column Mounting) Hex Bolt / Nylon Nut / Spring Washer / Plate Washer -M6x25 (SUS) 4PCS Adaptor Plate Adaptor (AC24V/3A)

  • Page 9: Mounting

    4. Mounting This unit is designed for installation in the upright or inverted position. It is a heavy duty mechanism and needs a secure and safe installation surface, and we recommend installers use brackets, towers and columns which comply with the industrial standard - 4”...
  • Page 10 Adaptor Plate UK_Column Mounting A Safety Wire, made from stainless steel, is provided for securing the Raptor during installation and maintenance visits to prevent damage and injury. During installation and maintenance visits, please be sure the Safety Wire is firmly connected to a secure fixing. VHT Raptor Manual Ver.

  • Page 11: Offset Mounting

    ■ Offset Mounting When an installation requires the camera module to be tilted down – to obtain an angle of view immediately below Raptor – the following procedure should be followed. We recommend using a local test monitor to check the viewing angle before finally fixing the module into position.

  • Page 12: Wiper Set Change

    ■ WIPER SET CHANGE Wiper Set Change Wiper Set by undo and tighten the fixing screw. Please keep the window clean to use a long time. ■ CABLE 14PIN CONNECTION VHT Raptor Manual Ver. 3.1 June 2012...

  • Page 13: Telemetry Control

    5. Telemetry Control This unit is designed with a range of diverse Telemetry Control systems, based on compatibility with industrial standard protocols. It works by using these integrated protocols directly, or via 3 party protocol convertors. Telemetry Control is via way of RS485 or Coaxial based video transmission equipment.

  • Page 14: Protocol Settings

    • Protocol Settings Protocol is selected using switches DP21-1, DP21-2, DP21-3 and DP21-4. The configuration of the Protocol is as follows. When an installer uses a protocol based Coaxial cable, it isn’t using a RS485 Address so may leave Address 0. Description DP1-1 DP1-2 DP1-3 DP1-4 Apply...

  • Page 15: Baud Rate Settings

    • Baud Rate Settings The Baud Rate, communication speed, is selected using switches DP21-5, DP21-6 and DP21- Baud Rate configuration settings are as follows: • RS485 Address Settings ID setting for DP22 switches SW1~SW7 DIP Switch setting 1-ON, 0-OFF DIP SW DIP SW DIP SW 1000000...

  • Page 16: Rs485 Termination

    1010001 0011101 1100111 0100001 1001101 0000111 0110001 1011101 0010111 1110001 0111101 1010111 0001001 1111101 0110111 1001001 0000011 1110111 0101001 1000011 0001111 1101001 0100011 1001111 0011001 1100011 0101111 1011001 0010011 1101111 0111001 1010011 0011111 1111001 0110011 1011111 0000101 1110011 0111111 1000101 0001011 1111111 0100101...

  • Page 17: Keyboard Operation

    • Keyboard Operation Key Sequences and Joystick movements are executed to closely control the camera and program the Telemetry Control system of Raptor. Examples of these are PRESET and TOUR. If a Keyboard can’t be used to access and change the camera parameters, most characteristics are accessible through the camera’s OSD menu.

  • Page 18: Setup Menu Overview

    6. Setup Menu Overview In this chapter, we will look at the overall structure of the Setup Menu and then look at the function of each menu. MAIN MENU → PAN/TILT ID DISPLAY ON/OFF → P/T DISPLAY OFF/ON CAM NAME →...
  • Page 19 CAMERA ATW MODE→ AUTO,ATW,INDOOR, OUTDOOR,ONEPUSH,MANUAL,OUTAUTO, SODIUM AUTO, SODIUM FIX ONE PUSH TRG → <SET> → 0~200 MANUAL RED MANUAL BLUE → 0~200 EXIT FOCUS FOCUS MODE→ AUTO/ZOOMTG/MANUAL /ZOOM AF SENSITIVE→NORMAL/LOW →OFF/ON DIG ZOOM ZOOM SPEED → 0~7 EXIT AE MODE → AUTO/SHUTTER/ MANUAL →...
  • Page 20 SPECIAL STABILIZER→ OFF/ON AE RESPONSE → OFF/ON → OFF/ON IMAGE FLIP IMAGE MIRROR → OFF/ON → 0~14 SHARPNESS →OFF/1~5 DE-FOG → OFF/(AUTO)/(USER) (AUTO) AUTO LEVEL → 1~10 EXIT (USER) FOG LEVEL → 0~15 FOG GAMMA → 0~15 → 0~64 STRENGTH UVSTRENTGH →...
  • Page 21 → OFF/ON SCAN DEFINE NAME → SCANGROUP1 SCAN NAME DEFINE→OFF/<ON> PAN START POS→ <180> PAN END POS → <350> → <45> TILT POS SCAN SPEED→2˚,5˚,10˚,20˚/S EXIT PATT NUMBER → 1~2 PATTERN PATT DEFINE → OFF/ON → PATTERN001 NAME PATT NAME DEF→ OFF/<ON> PATT RECORD →...

  • Page 22: Main Menu

    WIPER RUN → AUTO/<PUSH>/<RUN>/<STOP> WIPER EXIT INITIALIZE POWER ON RESET PAN/TILT INIT CAMERA INIT AUTOSEQ INIT PRIVACY ZONE INIT FACTORY INIT EXIT System Information The diagrams shown in the previous section illustrated the overall structure of the setup menu. In this section, descriptions of the features within the setup menu will enable users of the camera to tailor it to their personal needs.

  • Page 23: Id Display

    7. IMAGE HOLD OFF/ON 8.INSTALLATION NORMAL/INVERT 9 AUTO REFRESH 5~240 10.EXIT Selection: UP, DOWN, LEFT, RIGHT KEY Menu Open: IRIS OPEN KEY Menu Close: IRIS CLOSE KEY ■ ID DISPLAY – Camera ID OFF: The ID does not appear on the screen. The ID appears on the screen.

  • Page 24: Camera Name

    When moving to a preset, the screen displays the frozen image of the last displayed preset position. OFF: Displays the current image. ON: Displays the frozen image. Caution - FREEZE works during a SEQ, TOUR in AUTORUN MODE. ■ AUTO REFRESH If a PAN/TILT operation overruns its setting value AUTO REFRESH automatically compensates.

  • Page 25: Camera Set

    DELETE : <IRISOPEN> POSITION : <IRISOPEN> EXIT Selection: UP, DOWN, LEFT, RIGHT KEY Menu Open: IRIS OPEN KEY Menu Close: IRIS CLOSE KEY The method for naming a Camera is as follows: 1. Select DELETE and cancel MAINCAMERA by pressing the IRIS OPEN KEY. 2.

  • Page 26: Motion Det

    * ON : WDR is activated * AUTO : WDR is determined automatically. * FIX : Shutter speed in bright area is fixed. It can be applied to license plate recognition at night. *MANUAL : Adjust menus under WDR manually. ■...

  • Page 27: Motion Det

    ■ INTERVAL T MD is re-activated in accordance with setting time after Motion Derection. ■ AREA START H, AREA START V Set a start area of Motion Detection. ■ AREA END H, AREA END V Set an end area of Motion Detection. Caution 1.
  • Page 28 White Balance is optimized for an indoor environment. ■ ATW MODE  ONE PUSH White Balance is optimized for the current lighting conditions. If the lighting conditions change, the White Balance should be readjusted. It is operated by pressing the IRIS OPEN KEY when < HOLD > is off. ■...
  • Page 29 button. ■ ZOOM SPEED Adjust the zoom tracking speed. 2.5. AE 1. AE MODE: AUTO/SHUTTER/ MANUAL 2. IRIS: CLOSE~F1.6 3. GAIN: 0~15 4. SHUTTER: 1/1~1/10000 5. SLOW SHUTTER: OFF/ON 6.BLC: OFF/ON 7. EXIT ■ AE MODE * AUTO IRIS and GAIN are Controlled automatically. Shutter speed is fixed at 1/60sec(NTSC) or 1/50sec(PAL).
  • Page 30 Caution SLOW SHUTTER SPEED OFF doesn’t work when WD MODE is ON. ■ BLC If the subject shows dark against a bright background, this function is useful. 2.6. DAY&NIGHT 1. AUTO ICRMODE: OFF/ON 2. ICR MODE: DAY/NIGHT 3. THRESHOLD: 1dB ~ 28Db 4.
  • Page 31 2.7. SPECIAL 1. STABLIZER: OFF/ON 2. AE RESPONSE: 1~32 3. IMAGE FLIP: OFF/ON 4. IMAGE MIRROR: OFF/ON 5. SHARPNESS: 0~14 6. NR OFF/1~5 7. DE-FOG OFF/AUTO/<USER> 8. EXIT ■ STABLIZER ON Set “ON” to mitigate the video vibrations when the camera is in an unstable environment, such as mounted on a pole which is subject to wind movement.
  • Page 32 2.7.1 DEFOG AUTO SETUP 1. AUTO LEVEL 0~10 2. EXIT If set higher value of AUTO LEVEL, DEFOG function will be sensitive. 2.7.1 DEFOG USER SETUP 1. FOG LEVEL 0~15 2. FOG GAMMA 0~15 3. STRENGTH 0~64 4. UV STRENGTH 0~13 5.
  • Page 33 6. AUTO RUN OFF/SEQ/TOUR/SCAN/PATT/PAN 7. HOME POSITION OFF/1~128 8. EXIT Menu Shift: UP, DOWN, LEFT, RIGHT KEY Menu Open: IRIS OPEN KEY Menu Close: IRIS CLOSE KEY PRESET Location of the PAN/TILT and ZOOM can be programmed. In an ALARM or TOUR operation, the camera moves to the programmed preset.
  • Page 34 6. ATW: <SET> 7. EXIT Menu Shift: UP, DOWN, LEFT, RIGHT KEY Menu Open: IRIS OPEN KEY Menu Close: IRIS CLOSE KEY ■ PRESET NO A total of 128 presets can be set up. Changing the PRESET NO is achieved by using the LEFT and RIGHT KEY. ■...
  • Page 35 <Caution> When setting a PRESET and TILT is over 90°, PAN/TILT automatically moves to the position -20°~90° and TILT is limited to 90°. 3.2. TOUR This function makes the camera repeatedly follow a series of pre-programmed presets. 1. TOUR NO: 1 ~ 5 2.

  • Page 36: Scan Define Off/On

    4. Press the IRIS CLOSE KEY to finalise the setting. ■ NAME Changing the name of a TOUR GROUP. The method for changing the name is as follows: 1. After changing TOUR NAME DEF from OFF to <ON>, press the IRIS OPEN KEY. 2.

  • Page 37: Camera Name

    ■ SCAN NO A maximum of 5 Scans can be registered. ■ SCAN NO DEF OFF  SCAN is cancelled ON  SCAN can be set up (it should be “ON” for operation in AUTO RUN) <Setting example> SCAN NO SCAN DEF SCAN will be executed in programmed preset 1,3 &5.

  • Page 38: Patt Number → 1~2

    The speed can be set between 2°/sec (slow) ~ 20°/sec (fast). <Caution > 1. The values applied for WDR and ATW are those set on the OSD. 2. Set up angle of the initial and finish location for the SCAN should not be over 180°. 3.

  • Page 39: Auto Pan

    MEMORY FILL: XXX ( Recorded ) START:IRIS OPEN EXIT:IRIS CLOSE PAN/TILT Shift: UP, DOWN, LEFT, RIGHT 2. Move PAN/TILT to the desired position before starting PATTERN. 3. Press IRIS OPEN KEY to start the process 4. Press IRIS CLOSE to save the process. <Caution >...

  • Page 40: Area Sel

    1.AREA SEL 1 ~ 8 2.AREA DEFINE OFF/ON 3.AREA COLOR BLACK!MOSAIC 3.AREA NEW SET OFF/ON 5.HEIGHT EDIT 6.WIDTH EDIT 7.PAN ANGLE 8.TILT ANGLE 9.EXIT MENU Shift: UP, DOWN, LEFT, RIGHT KEY MENU Open: IRIS OPEN KEY MENU Close: IRIS CLOSE KEY For protection of Privacy, set MOSAIC ZONE ■...

  • Page 41: Alarm Display → Off/On

    using PAN/TILT function. 2. Press the IRIS OPEN KEY to activate MENU and move to “ZONE SET”. And then, press the IRIS OPEN KEY again. 3. Change AREA SEL to 1. 4. Change AREA DEFINE from OFF to ON. 5. Change AREA NEW SET from OFF to ON. 6.

  • Page 42: Camera Set

    6.WIPER SET AUTO : WIPER is activated at TILT angle within 80°~100°. PUSH : WIPER is activated one time. RUN : WIPER ON OFF : WIDET OFF Select menu by using Joystick and Press IRIS OPEN to activation. 7. INITIALIZE SET 1.
  • Page 43 WTX-1200A – Simple PRESET Setting The following keyboard controller commands work when the OSD MENU is not activated. How to set up a PRESET 1. Move the camera to the desired PAN/TILT/ZOOM location using the Joystick. 2. Press No. 1 on the keyboard 3.
  • Page 44 WTX-1200A - Simple TOUR Operation Press number 71on the keypad followed by the F1 key. This works when TOUR DEFINE is ON and the TOUR related MENU is properly set up. WTX-1200A- Simple PATTERN Operation Press number 66 on the keypad followed by the F1 key. This works when PATTERN DEFINE is ON and the PATTERN related MENU is properly set up.
  • Page 45 Number Function Setting Preset 1~64+Preset Press Preset button for more than 2 seconds. 1~64+Preset Executing Preset 65+Preset Executing A.PAN 66+Preset Executing Scan 70+Preset Executing Sequency 71+Preset Executing Tour 81+Preset Executing Pattern 84+Preset Wiper Run 86+Preset Wiper (1 time operation) 80+Preset Wiper Stop 95+Preset IRIS OPEN (OSD Menu)

  • Page 46: Motion Det

    IR Distance 100M Pan/Tilt PAN 360°,Tilt 25°~205° OSD/DSP Digital Zoom OFF/2x/4x/8x/10x/12x Day & Night Color/BW/Auto(ICR) ON/OFF ON/OFF Shutter Speed Auto/Manual(1/3~1/10000sec) White Balance Auto/ATW/Indoor/Outdoor One Push/Outdoor Auto Video Gain 0~15 Level Control Noise Reduction OFF/1~5 Privacy Zone ON/OFF(8programmable zone) Presets 255 Programmable Digital Flip ON/OFF Focus control...
  • Page 47 Dimension (mm) VHT Raptor Manual Ver. 3.1 June 2012...
  • Page 48 VHT Raptor Manual Ver. 3.1 June 2012...
  • Page 49 Vision Bldg. 150-3 Simgok-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, 420-010 Korea Tel: +82-32-610-7800 +82-32-668-3113 Fax: Mail: vht@visionhitech.co.kr www.visionhitech.co.kr www.visionipvideo.com VHT Raptor Manual Ver. 3.1 June 2012...

Table of Contents