Schematic Diagram - Rf Section (2/2) - Sony ICF-SC1 Service Manual

ICF-SC1/SC1PC
5-9. SCHEMATIC DIAGRAM – RF SECTION (2/2) –
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1 / W or less unless otherwise
4
specified.
• U : B+ Line.
• Power voltage is dc 6 V and fed with regulated dc power
supply from external power voltage jack (J402).
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : WFM/AM/NFM
( ) : AM/NFM
< > : NFM
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F
r Refer to page 33 for IC Block Diagrams.
– 31 – – 32 –