Subscribe to Our Youtube Channel
Summary of Contents for Bluestream BS4590
- Page 1 MODEL: BS4590 Wireless Indoor/Outdoor Stereo Speaker System Instruction Manual For Technical Assistance or Troubleshooting Please Call 1-855-719-8324...
-
Page 2: Fcc Warnings
WARNINGS To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • To reduce the risk of electric shock, do not open the cabinet. No user serviceable parts are inside. Refer servicing to •... -
Page 3: Component Identification
COMPONENT IDENTIFICATION TRANSMITTER 1. Power LED Indicator DC 8V 2. Signal LED Indicator 3. Audio Inputs (Standard RCA Inputs) 4. Channel Selector Switch 5. 8V DC IN DC 8V SPEAKERS 6. Remote Sensor 7. Volume Up button 8. Volume Down button 9. -
Page 4: Using Your Speakers
USING YOUR SPEAKERS CONNECTING THE TRANSMITTER Plug the supplied 8V AC/DC power adapter into the DC IN jack (5) located on the rear of the transmitter. Insert the wall plug of the power adapter into an electrical wall outlet. The Power LED Indicator (1) will glow Green. - Page 5 DC 8V Included 3.5mm (M) RCA (M) to RCA (M) cable to RCA (M) cable (Not Included) Connect a Device with RCA Outputs To connect a device with standard Red & White RCA audio outputs, connect the Red & White plugs of a standard RCA audio cable (not included) to the matching color coded outputs of your device and to the Audio Inputs (3) on the Rear of the Transmitter.
-
Page 6: Remote Control
DC IN (14) Locking Tabs USING YOUR SPEAKERS WITH BATTERIES Remove the door for the Battery Compartment (12) by gently pressing the two locking tabs inward at the same time and carefully lifting upwards. Insert 6 ‘AA’ size batteries (not included) into the Battery Compartment (12). -
Page 7: Turning The Device On Or Off
TURNING THE DEVICE ON or OFF SPEAKERS To turn the Speakers ON/OFF press the POWER button (10) on the front of each Speaker or press the ON/OFF button (15) on the remote. When the Speakers are ON, the Power/Signal LED Indicator (11) will glow Blue. TRANSMITTER The Transmitter will automatically turn ON when connected to an electrical outlet. -
Page 8: Adjusting The Volume
• When the speaker is ON the Power/Signal LED Indicator (11) will light 5. Press the TUNE button (9) on the front of the Speakers or on the Remote (17) and the Speakers will automatically connect to the Transmitter. This may take a few seconds. -
Page 9: Troubleshooting
TROUBLESHOOTING NO SOUND • Make sure the AC adapter is fully inserted into the electrical outlet and the DC Input on the Transmitter (5). • Make sure the Speaker is ON by checking the Power/Signal LED Indicator (11). If the Power/Signal LED Indicator (11) is not lit up, either connect the AC adapters, or replace the batteries in the speaker(s). - Page 10 LIMITED 90-DAY WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a ninety-day period from the original date of purchase from an authorized BLUESTREAM dealer. Should you be missing any of the included accessories or other components (screws, pieces, etc.), please contact the Customer Support Center to secure a replacement.
- Page 11 Schoenfeld International Inc. and BLUESTREAM 5001 American Boulevard West Suite 275 Bloomington, Minnesota 55437 ©Schoenfeld International Inc., 2013 BS4590 Ver. 1.0 November 2013...
Need help?
Do you have a question about the BS4590 and is the answer not in the manual?
Questions and answers