Auto Adjustment; Setting Picture Format; Screen Position - LG RU-42PX10 Owner's Manual

Operation
Screen Menu Options
Screen Menu Options
Auto Adjustment
Auto Adjustment
- RGB (PC) mode only; This function doesn't work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
- The Auto config. and Manual config.
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button to run Auto configure.
• When has finished,
Auto config.
• If the position of the image is still not correct, try Auto adjustment again.
4. In RGB (PC) mode, if the image needs to be adjusted more after using
config. , you can make further adjustments with the

Setting Picture Format

Setting Picture Format
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for TV, Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and DVI-PC sources.
- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
1. Press the ARC button repeatedly to select the desired picture format. You can also adjust
•
4:3
Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the
4:3
left and right sides.
• 16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•
Horizon
Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides,
Horizon
to create a spectacular view.
• Zoom
- Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the
picture will be cropped.

Screen Position

Screen Position
- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), DVI-DTV (480p,720p,1080i), COM-
PONENT (480p,720p,1080i).
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
4. Press the ENTER button to save.
28 Plasma TV
are not active in DVI mode.
D / E button to select the
button to select Auto config.
D / E
will be shown on screen.
OK
Manual config.
D / E button to select the
button to select
D / E Position
D / E / F / G
button to adjust the position.
SCREEN menu.
CHANNEL
.
PICTURE
SOUND
TIMER
SPECIAL
Auto
option.
SCREEN
PIP/DW
LOCK
ARC
CHANNEL
PICTURE
SOUND
SCREEN menu.
TIMER
.
SPECIAL
SCREEN
PIP/DW
LOCK
G To set
Auto config.
ARC
Position
Manual config
Reset
Menu Prev.
in the SCREEN menu.
Auto config.
ARC
D
G
Position
F G
E
Manual config
Reset
Prev.
Menu