Monster Moto MM-X70 Owner's Manual

Monster Moto MM-X70 Owner's Manual

4-speed automatic pit bike

Advertisement

OWNER'S MANUAL
MM-X70
MM-X70G
PIT BIKE
4-Speed Automatic
MM-X70F
Important information.
.com
Read Owner's Manual thoroughly
VISIT US ONLINE OR CALL
before riding the first time.
855-833-6483

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM-X70 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Monster Moto MM-X70

  • Page 1 OWNER’S MANUAL MM-X70 MM-X70G PIT BIKE 4-Speed Automatic MM-X70F Important information. .com Read Owner’s Manual thoroughly VISIT US ONLINE OR CALL before riding the first time. 855-833-6483...
  • Page 2 This manual contains the latest product information available before printing. Due to improvements or production changes, there could be discrepancies. Monster Moto reserves the right to make changes at any time, without notice and without obligation to make the same or similar changes to any vehicle previously built or sold.
  • Page 3: Table Of Contents

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Contents Introduction and Safety Messages 1 - 5 Operating Controls 6 - 9 Before riding 10, 11 Basic Operation & Riding Technique 12 - 15 12, 13 Starting and Stopping the Engine Shifting Gears Braking Technique Parking &...
  • Page 4: Warranty Information

    Warranty Information Congratulations on your decision to purchase a Monster Moto Power Sports product! We are gratified that you have chosen a Monster Moto product, and we are dedicated to supporting your successful and safe power sports recreation experience! In order to assure your quality experience, please review and make note of the following warranty related issues: KEEP YOUR RECEIPT: Proof of purchase will be required to substantiate any warranty claim.
  • Page 5: Introduction And Safety Messages

    Replacement parts and technical support can be obtained online at www.monstermoto.com or through phone at 855-833-6483. Please be sure to register your Monster Moto product and notify us of any address changes so we may contact you in the future with any important product information.
  • Page 6: Important Safety Information

    855-833-6483 OR EMAIL US AT info@monstermoto.com Important Safety Information Your personal safety, and the safety of those around you, is extremely important. Operating this motorcycle safely is an important responsibility. Monster Motor has provided operating procedures and other information on labels and in this manual to help you make informed decisions about safety.
  • Page 7 PROBLEMS? DO NOT RETURN TO STORE! CALL US! Important Safety Information A motorcycle can provide many years of service and pleasure, provided you take responsibility for safety, properly maintain your motorcycle and understand the challenges you may encounter while riding. This motorcycle has been designed for younger riders.
  • Page 8 855-833-6483 OR EMAIL US AT info@monstermoto.com Important Safety Information for Parents As a parent, your child’s safety is your first priority. Riding an off-road motorcycle is very fun. However, just like riding a bicycle, bad decisions can result in injury. As a parent, you can greatly prevent accidents by making informed decisions about if, when and how your child will ride.
  • Page 9 Others will provide important safety and maintenance information. Please read them carefully and do not remove them. If your label wears off from riding or becomes hard to read, contact Monster Moto for a replacement. Safety Messages...
  • Page 10: Operating Controls

    Attaching The Handlebars Your Monster Moto Pitt Bike is shipped with the handlebars NOT bolted on. To attach the handlebars follow the steps below: 1. After unpacking your pitt bike, stand it on the side stand on a flat level surface.
  • Page 11: Operating Controls

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Operating Controls Fuel Valve The two way fuel valve is used to control the flow of fuel from the gas tank to the carburetor. The valve is located under the gas tank. Turning the fuel valve to the “ON” position before starting the engine allows fuel to flow from the tank to the carburetor.
  • Page 12: Rear Brake Pedal

    855-833-6483 OR EMAIL US AT info@monstermoto.com Operating Controls Front Brake Lever Front Brake Lever The front brake lever is used to apply the brake to the front wheel and will slow or stop the motorcycle. When you pull back on the lever, brake fluid is forced into the brake caliper causing the caliper to close on the brake disc.
  • Page 13: Operating Controls

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Operating Controls Kickstarter Kickstarter The kickstarter is used to start the engine. To use the kickstarter, pull it out from its stored position and depress it through its entire stroke with your foot. Please refer to the Basic Operation and Riding section of this manual for detailed instructions on starting the engine.
  • Page 14: Before Riding

    855-833-6483 OR EMAIL US AT info@monstermoto.com Before Riding Before you ride, you must be absolutely sure that you and your motorcycle are ready to ride. To help you get prepared, this section of the manual will discuss how to evaluate your riding readiness and how to preform our recommended pre-ride inspection of your motorcycle.
  • Page 15: Pre-Ride Inspection

    - Step on the rear brake pedal and squeeze the front brake lever to be sure the brakes are working properly. Remember, be sure to take care of any problems you find or have your Monster Moto dealer correct it before you ride.
  • Page 16: Basic Operation & Riding Technique

    855-833-6483 OR EMAIL US AT info@monstermoto.com Basic Operation & Riding This section of the manual gives basic information on how to begin riding your motorcycle. In this section we will cover how to start and stop the engine, how to use the throttle and brakes, how to shift gears, and things you need to do when you are finished riding.
  • Page 17: Flooded Engine

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Starting & Stopping the Engine Starting Procedure (cont.) 3. Once the engine starts, warm up the engine by opening and closing the throttle slightly. 4. About 15 seconds after the engine starts, push the choke lever all the way down to position B (fully off).
  • Page 18: Shifting Gears

    855-833-6483 OR EMAIL US AT info@monstermoto.com Shifting Gears This motorcycle has four forward gears. To start riding, after the engine has been warmed and the side stand raised: 1. Close the throttle and squeeze the front brake lever all the way in. 2.
  • Page 19: Braking Technique

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Braking Technique This section will cover basic braking technique for your motorcycle. To slow or stop the motorcycle, squeeze the front brake lever and rear brake pedal firmly and smoothly. If your speed is reduced a significant amount, you may need to downshift to a lower gear.
  • Page 20: Maintaining Your Dirtbike

    In this section you will also find important safety precautions, information on oils, and tips for keeping your Monster Moto looking good. Careful pre-ride inspections and good maintenance are invaluable because your motorcycle is designed to be ridden over rough, off-road terrain. To help you properly care for your motorcycle, this section provides you with a maintenance schedule.
  • Page 21: Maintenance Schedule

    If you decide to do your own maintenance, use only replacement parts that you have purchased from a Monster Moto dealer or parts purchased directly from Monster Moto. This will ensure the best quality and reliability for your motorcycle.
  • Page 22: Component Locations

    855-833-6483 OR EMAIL US AT info@monstermoto.com Component Locations Fuel Tank Fuel Filter Carburetor Left Side Cover Front Brake Line Chain Gaurd Rear Sprocket Front Brake Drum Side Stand Right Side Cover Front Brake Lever Oil Fill Cap Spark Arrester Front Fork Spark Plug Clutch Adjuster Front Axle...
  • Page 23: Fuel & Engine Oil

    86 or higher. Most service stations will display the octane rating above each pump. Although it is not required, Monster Moto recommends use of gasoline with a 92 octane rating or higher to ensure maximum performance and reliability.
  • Page 24: Checking And Adding Oil

    855-833-6483 OR EMAIL US AT info@monstermoto.com Basic Maintenance Procedures Engine Oil Recommendation (Cont.) Other viscosities shown in the chart below can be used when the average temperature in your riding area are within the indicated range. SAE 20W-50 SAE 20W-40 SAE 10W-40 SAE 10W-30 Checking and Adding Oil...
  • Page 25: Changing Engine Oil

    6. Apply a quality air filter oil to the filter element. 7. Install the air filter and tighten the filter clamp screw Securely. 8. Replace the fuel filter every 12 months or when it is clogged. See your Monster Moto dealer for replacements. 21 Maintaining Your Dirtbike...
  • Page 26: Throttle Freeplay Adjustment

    If you cannot obtain proper freeplay, contact your Lock Nut autorized dealer or Monster Moto directly for assistance. Adjuster Nut Engine Idle Speed Adjustment The engine must be at normal operating temperature in order to have an accurate idle speed adjustment.
  • Page 27: Spark Plug

    If your plug looks like this, have your motorcycle serviced by your Monster Moto dealer immediately. A carbon fouled plug will be completely black with no gloss. An oil fouled plug will appear a dark shiny brown or shiny black as shown above. An oil fouled plug is caused when the engine oil seeps by the piston ring and is burned with the fuel.
  • Page 28: Front Brake Adjustment

    Refer to the photo on the previous page. Never ride the motorcycle when the brakes are not working properly. If you cannot repair the brakes, have them serviced by your Monster Moto Dealer. DO NOT RIDE the bike. Maintaining Your Dirtbike 24...
  • Page 29: Rear Brake Adjustment

    Never ride the motorcycle when the brakes are not working properly. If you cannot repair the brakes, have them serviced by your Authorized Monster Moto Service Center. DO NOT RIDE the bike.
  • Page 30: Suspension Inspection

    855-833-6483 OR EMAIL US AT info@monstermoto.com Basic Maintenance Procedures Front Suspension Inspection 1. Check the fork operation. Pull in the front brake lever to Upper Triple Clamp lock the front wheel. Next, pump up and down on the forks several times. The suspension should feel clean and smooth.
  • Page 31: Tires & Wheel Rims

    It is not necessary to remove the wheels for regular maintenance, however, information on wheel removal is available from Monster Moto your Monster Moto dealer. Wheel Rim Inspection Procedure 1. Inspect the wheel rims and spokes for damage.
  • Page 32: Tire Inspection

    Check the position of both valve stems. A tilted valve stem indicates that the tube is slipping inside of the tire or the tire is slipping on the rim. See your Monster Moto dealer for assistance. Tube & Tire Replacement If a tube has been punctured or damaged, it should be replaced immediately.
  • Page 33: Drive Chain

    5. Inspect the front and rear sprockets for excessive wear or damage. Refer to the illustration at the top of page 30. If needed, replace any worn or damaged sprockets. See your Monster Moto dealer for assistance. 29 Maintaining Your Dirtbike...
  • Page 34: Drive Chain Slack Adjustment

    855-833-6483 OR EMAIL US AT info@monstermoto.com Basic Maintenance Procedures Drive Chain Inspection (cont.) Use the diagram below to determine if the sprockets need to be replaced. Never use a new chain with a damaged or worn sprocket. NOTICE Damaged Teeth Worn Teeth Use of a new chain on worn sprockets will REPLACE...
  • Page 35: Maintaining Your Dirtbike

    4. Inspect the sprockets for wear or damage. Monster Moto recommends that you replace the sprockets when you install a new drive chain. 5. Pass the chain over the sprockets and join the ends of the chain with the master link. For ease of assembly, hold the chain ends against adjacent rear sprocket teeth while inserting the master link.
  • Page 36: Troubleshooting

    Is the compression normal? - Valve stuck open/seized or improper valve timing (see your Authorized Monster Moto Service Center) - Worn cylinder wall and/or piston rings (replace engine) - Leaking or damaged cylinder head gasket (see your Authorized Monster Moto Service Center) - SEE STEP 5 5.
  • Page 37 7. Cylinder Compression Inspection - Check the cylinder compression. Is the engine compression normal? - Valve stuck open/seized or improper valve timing (see your Authorized Monster Moto Service Center) - Worn cylinder wall and/or piston rings (replace engine) - Leaking or damaged cylinder head gasket (see your Authorized Monster Moto Service Center)
  • Page 38 - Excessive carbon buildup in the combustion chamber 11. Ignition Timing Inspection - See your local Monster Moto dealer or motorcycle repair shop to have the ignition timing and engine lubrication system inspected. Only attempt these procedures if you are qualified and have the proper tools needed.
  • Page 39: Poor Performance At High Speed

    - Carburetor is not serviced frequently enough, contaminated fuel 3. Ignition Timing & Valve train Inspection - See your local Monster Moto dealer or motorcycle repair shop to have the ignition timing inspected. Only attempt these procedures if you are qualified and have the proper tools needed.
  • Page 40: Troubleshooting

    855-833-6483 OR EMAIL US AT info@monstermoto.com Troubleshooting Poor Handling Steering is heavy - Steering stem nut too tight - Damaged steering head bearings Either wheel has a Wobble - Excessive wheel bearing play - Bent Rim - Improperly installed wheel hub - Damaged swingarm - Bent frame - Loose or broken spokes...
  • Page 41: Resolving The Unexpected

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Resolving the Unexpected General Guidelines If you encounter trouble during a ride, the first thing you should do is stop as soon as it is safely possible. Do not continue to ride if you have a flat tire, if you hear an unusual noise, or if your motor cycle just does not feel right.
  • Page 42 855-833-6483 OR EMAIL US AT info@monstermoto.com Resolving the Unexpected If You Have a Flat Tire How you handle a flat tire on the trail will depend on the severity of the damage to the tire and/or the inner tube and what tools and supplies you keep with you. If you have a slow leak or a minor puncture, there are two ways you can try to make a temporary repair: 1.
  • Page 43: Your Warranty Rights And Obligations

    PROBLEMS? DO NOT RETURN TO STORE! CALL US! Emisson Control Warranty YOUR WARRANTY RIGHTS AND OBLIGATIONS The manufacturer warrants that each new 2013 and later vehicle: • is designed, built and equipped so as to conform at the time of initial retail purchase with all applicable regulations of the United States Environmental Protection Agency.
  • Page 44: Limited Liability

    No dealer is authorized to modify this Emission Control System Warranty. If you have any questions regarding your warranty rights and responsibilities, you should contact Monster Moto by calling 855-833-6483. Register your Monster Moto MM-X70 Pit Bike so that we can...
  • Page 45: Product Registration

    MM-X70 PIT BIKE 4-Speed Automatic Product Registration Please complete and mail this card within 10 days of inital purchase or register online. Name Address City State Email Home Phone Work Phone Purchase Date Purchased from VIN Number Male Female Occupation...
  • Page 46 IF YOU HAVE ANY PROBLEMS WITH THIS PRODUCT DO NOT RETURN TO STORE CALL 855-833-6483 MONSTERMOTO WILL HANDLE ALL SERVICE, WARRANTY, AND RETURN ARRANGEMENTS Monster Moto 1001 South Jupiter Road Garland, Texas 75042 CALL 855-833-6483 info@monstermoto.com .com MM-X70 PIT BIKE...

This manual is also suitable for:

Mm-x70gMm-x70f

Table of Contents