Touchboards CPX5 User Manual page 51

Displaying Thumbnail image
Image files in USB storage can be seen as thumbnail display. Use ▲, ▼, ◄ and ►
buttons to move a cursor to THUMBNAIL item in Thumbnail menu. Push ENTER
button on the remote control or INPUT/ENTER button on the projector to decide it.
Selected image
Thumbnail images
(up to 12 images)
THUMBNAIL items
Item
IMAGE
Page Up
Page Down
Thumbnail Display
Thumbnail Menu
Select image files to display as thumbnail.
1. Select [IMAGE] using ▲, ▼, ◄ and ► buttons, then push
ENTER button on the remote control or INPUT/ENTER button on
the projector so that [IMAGE] setting can be selected.
2. Change [IMAGE] setting using ▲ and ▼ buttons.
ALL (Display all) ó STILL PICTURE (Display still picture only)
ô
MOTION PICTURE (Display motion picture only)
3. Get out from the status that [IMAGE] setting is selectable, by
pushing ENTER button on the remote control or INPUT/ENTER
button on the projector.
Move to previous thumbnail display page. (When current thumbnail
display shows image files between 13th and 24th, it shows image
files between 1st and 12th after move.)
Select [Page Up] using ▲, ▼, ◄ and ► buttons, then push ENTER
button on the remote control or INPUT/ENTER button on the projector.
[Page Up] key on remote also can be used.
Move to following thumbnail display page. (When current thumbnail
display shows image files between 1st and 12th, it shows image
files between 13th and 24th after move.)
Select [Page Down] using ▲, ▼, ◄ and ► buttons, then push
ENTER button on the remote control or INPUT/ENTER button on
the projector.
[Page Down] button on remote also can be used.
Menu
Description
ô
USB STORAGE
5