Advertisement
Quick Links
D) Specification
Model No.
TE-300D
TE-400D
Power Range
300Ws
400Ws
Modeling
150W
150W
Guide No.(ISO100/m)
55
Recycle Time
0.5~1.5s
Power Control
Flash Duration(t: 0.5s)
Angle of Illumination
Color Temperature
Operating Voltage
Triggering
Accessories Included
Optional Accessories
Softbox, Barndoor ,honeycomb , Color Filter Set, Snoot, Light Stand, Umbrella etc.
E) Attentions
Since there could be high voltage inside the unit, please DO NOT open
or repair the unit yourself. If there is any defect, please contact the
experienced technician.
Avoid strong light directing to the photo sensor.
For better maintenance, if the unit has been triggered continuously 10
times in a short period please leave the unit dormant 2 minutes.
Please ensure the power is switched off after use.
3
TE-500D
TE-600D
TE-900D
500Ws
600Ws
900Ws
250W
250W
150W
64
70
78
90
1~2s
1~2.5s
1~3s
1~3.5s
1/32~1, (LED step 1.0-6.0)
1/400-1/1100
≥55°
5300K - 5500K
AC 110-120 60Hz/AC 220-240 50Hz
Photo Sensor, Sync Cord, Test Button
Reflector,Power Cord, Sync Cord, Modeling Lamp
TE-1200D
1200Ws
250W
100
1~4s
Thank you for purchasing FalconEyes' products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
Falcon Eyes Limited
FM1012_TE-D_eng
TE-D Series Studio Flash
Instruction Manual
TE-300D / TE-400D / TE-500D
TE-600D / TE-900D / TE-1200D
Advertisement
Related Manuals for Falconeyes TE-300D
Summary of Contents for Falconeyes TE-300D
- Page 1 TE-600D / TE-900D / TE-1200D Thank you for purchasing FalconEyes’ products. For further details of our related products, please contact your local distributor or visit our webpage at www.falconeyes.com.hk Thank you. Please read this manual carefully before using this product.
- Page 2 A) Features C) Instructions Connect to the power supply. Turn on the lighting unit and the This is a stable and quick rechargeable studio flash system. Its power is modeling lamp. Then, the brightness of the flash tube and the modeling variable from 1/32 to 1.
Need help?
Do you have a question about the TE-300D and is the answer not in the manual?
Questions and answers
1 of my studio lights (TE 300D) only flashes once and then the Ready lamp does not light anymore also the continuous light does not light anymore. I have already replaced the fuse but this has no effect.
The issue could be due to the flash unit's thermo-sensitive protection. If the temperature exceeds the safety limit, the unit will shut down, indicated by a green light. Once it cools down, it should function again. Ensure the unit is not overheating and allow it to cool if necessary. Additionally, check that the power is properly connected and switched on. If the issue persists, contact an experienced technician.
This answer is automatically generated