Selecting A Chapter, Track, Or Starting Time; Selecting A Track With The Number Buttons; Repeating A Chapter, Title, Or Track; Creating A Playback Loop - Electrohome EAKAR770 Instruction Manual

Selecting a chapter, track, or starting time

To select a chapter, track, or starting time:
1. During disc playback, press GOTO. A bar with a highlight is displayed.
Press ◄ or ► to select a chapter or track, then press ENTER.
2.
OR
Press ◄ or ► to move to the time item, press the number buttons to enter the starting time you want, then
press ENTER.

Selecting a track with the number buttons

To select a track with the number buttons:
During playback, press the number buttons for the track you want to play. For example, to play track 7, press 7. To
•
play track 11, press 11.

Repeating a chapter, title, or track

To repeat a chapter, title, or track:
During playback, press REPEAT.
1.
For discs, you can select REPEAT CHAPTER, TITLE, ALL, or REPEAT OFF.
•
• For a USB flash drive or an SD memory card, you can select REPEAT TRACK, DIRECTORy, ALL or OFF.
To return to normal playback, press REPEAT until REPEAT OFF appears on the display.
2.

Creating a playback loop

To create a playback loop:
During playback, find the place where you want the loop to start, then press A-B.
1.
2. Play the file until you come to the place where you want the loop to stop, then press A-B. Your karaoke system will
play the loop continuously.
To cancel the playback look and resume normal playback, press A-B twice.
3.

Creating a playback program

To create a playback program:
1. During playback, press PROG. The following screens opens:
2. Use the arrow buttons and number buttons to enter title/
folder number and chapter/track number of the chapter/
track you want to play.
3. Repeat Step 2 to enter additional selections. A program can
have as many as 16 selections.
4. When you have finished creating your program, highlight PLAy, then press ENTER. The selections you made are
played in the order you entered them.
If you want to change a selection, press PROG, highlight the selection, then enter a new selection. Highlight PLAy
5.
and press ENTER.
6. To clear all the selections from the program, press PROG, highlight CLEAR, then press ENTER.
OPERATION
- 17 -