Do you have a question about the FH1500-WR and is the answer not in the manual?
Questions and answers
Dorothy
March 18, 2025
We have two heaters that are no longer working after a storm. They show what looks like an error code of 1, but none of the other functions are working. Is there any way to reset the heaters?
Summary of Contents for VDG FH1500-WR
Page 1
INFRARED HEATER OWNERS MANUAL Model Numbers: FH1500-WR; IFML NO VENTING REQUIRED Power: 120V AC; 60 Hz; 8.3 Amps ~ 12.5 Amps Power consumption: 1000 Watts ~ 1500 Watts WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, serious personal injury, or death.
IMPORTANT SAFETY INSTRUCTIONS! WARNING Read all instructions before using the heater! DO NOT USE OUTDOORS! DO NOT run power cord under carpeting. DO NOT cover power cord with throw rugs, runners, or similar coverings. DO NOT route power cord under furniture or appliances. Arrange power cord away from traffic area, and where it will not be tripped over.
Page 4
WARNING Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric heater. ALWAYS store this heater in a dry location. NEVER use the heater if it has become wet. ...
PREPARATION Remove the heater and remote control from the carton and place them on a clean, soft, dry surface. Make sure nothing is damaged. Dispose of packaging materials properly. Please recycle whenever possible. PARTS Item Description Heater Remote Control INTRODUCTION Thank you for your purchase of this fine quality infrared heater.
LOCATION This Infrared Heater uses quartz infrared heating elements and heat exchangers to produce safe and economical heat. The quartz infrared heating elements transfer heat to the heat exchangers. In turn, the fan moves the warmth from the heat exchangers through the room. To gain the most benefit from the infrared heater, we recommend the following: 1.
OPERATION Infrared Technology Basics 1. Air enters the heater through the washable air filter at the rear of the unit. 2. Heat is transferred from the quartz infrared heating elements to the heat exchangers that surround them. 3. The fan moves the filtered air over the heat exchangers. As the air moves over the heat exchangers, heat is transferred to the air.
Control Panel Operation BUTTON OPERATION / FUNCTION CONTROL PANEL DIAGRAM Press once: Power and indicator turn on. Functions are enabled. Press again: Power, indicators, and all functions turn off. Power Temp: Press or to select the temperature setting. The heater will turn on and off automatically to maintain the set Temp...
Remote Control Operation BUTTON OPERATION / FUNCTION CONTROL PANEL DIAGRAM Press once: Power and indicator turn on. Functions are enabled. Press again: Power, indicators, and all functions turn off. Temp: Press to select the temperature setting. The heater will turn on and off automatically to maintain the set temperature.
CARE AND MAINTENANCE Maintenance Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this heater. Failure to do so could result in electric shock, fire, or personal injury.
Filter Maintenance ALWAYS turn the heater OFF and unplug the power cord from the outlet before changing the filter. Failure to do so could result in electric shock, fire, or personal injury. Your Infrared Heater is equipped with an easy to clean, washable static filter. Regular cleaning and maintenance of your filter will ensure a lifetime of trouble-free use.
In no event will VDG, or its officers, directors, or agents be liable for any direct losses, costs, or damages that exceed the purchase price of the product.
Need help?
Do you have a question about the FH1500-WR and is the answer not in the manual?
Questions and answers
We have two heaters that are no longer working after a storm. They show what looks like an error code of 1, but none of the other functions are working. Is there any way to reset the heaters?