Turning On The Projector - Zenith LXG-120 Owner's Manual

Turning on the Projector

1
Remove the lens cover of the projector.
2
Press the main power button on the back panel.
3 Press the power
during warming up of the lamp.)
An image appears after the green power indicator has flashed for some time.
4 Select the source mode.
Press the source button repeatedly to change between PC and A/V Inputs.
5 Adjust volume level.
Press volume buttons to increase or decrease sound level.
23
button on the remote control or top cover. (Green operation indicator flashes
24
• Do not shut off the main power (back panel switch) or unplug the power cord while the
ventilation fan is in operation.