Panasonic Viera TH-P42UT30D Operating Instructions Manual page 16

■
[Wireless]
3
Select the connection type
Connection Type
Please select network connection type.
Search for access point
WPS(Push button)
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No. SSID
1 Access Point A
2 Access Point B
3 Access Point C
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H
U V W X Y Z
a b c d e f g h
u v w x y z (
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on TV.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Perform the connection test after the access point setting is finished
Connection Test
Complete the network connection
4
(Press twice)
16
1
Wireless type Encrypt Reception
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
2
•
3
I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
i j k l m n o p q r s t
) + - . * _
•
4
•
•
No
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
Connect
•
•
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
•
If your access point supports WPS (Push
select
button), then select this option. If not,
confirm
select [Search for access point].
Select your desired access point
•
select To search access points again
•
For the information of the
access
highlighted access point
•
To set manually (p. 63)
Access the encryption key input mode
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
Enter the encryption key of the access point
(Set characters one by one)
select
Store
set
You can set characters by using numeric buttons.
Select [Yes]
select
set
To re-enter the encryption key, select [No].
If the connection has failed, check the encryption key, settings
and positions of your access point. And then, follow the on
screen instructions.
Ensure that your access point supports WPS for this method.
WPS: Wi-Fi Protected Setup™
: succeeded
The test is successful and the TV is connected
to the network.
: failed
Check the settings and connections, and then
select [Retry].
•
To set manually, select [Manual] and set each item.
For details
INFO
R
RETURN
(p. 63)
Y