Singer 14T967DC Workbook page 153

4. Turn the hand wheel toward you until the Chainstitch Looper extends out
10mm (approximately ½ inch) from the needle plate edge.
5. Thread the looper area of the machine following the brown color-coded
thread guides 4-11. Use the tweezers provided in the accessory case to
aid in threading the looper.
6. Place the thread through threading guides
7. Continue threading guides
8. Thread the looper eye (A) from front to
back. Pull about 4 inches of thread
through the looper. Position the thread into
the V cutout (B) on the threader. Firmly
hold the thread tail with left hand and pull
threader lever (C) up into place (D). Gently
pull 5-6" of thread to the back of the machine.
, , and
"V" cutout
Five-Thread Safety Stitch Wide page 12
and .
.
Threader Lever