Painting the subwoofer................................. 8 Maintenance of subwoofer................................9 How to remove grille................................9 How to change woofer ............................... 9 How to remove terminal module ........................... 9 Technical information..................................10 Specsheet CW115................................10 Specsheet CW215................................11 Specsheet CW118................................12 Specsheet CW218................................13 Declaration of conformity ................................14 Warranty ......................................15 Ordering spare parts..................................15...
To get the most out of your Mach speakers and ensure an easy and trouble-free installation please read the manual carefully and follow the instructions.
W Subwoofer series The CW subwoofers have been designed to complement the C-range of speakers. The cabi- nets have been shaped to achieve an attractive appearance as well as easy mounting and posi- tioning. All C-range products are constructed for heavy-duty use in professional environments. To fly a speaker: Check that all rigging hardware and fasteners will be able to bear at least ten times the weight of all installed items (speakers, lights,...
Page 6
To prepare a speakers for pole mounting: Unscrew the 4 countersunk bolts in the blanking plate. Remove the blanking plate, replacing it with the top hat adaptor. Screw the 4 countersunk bolts into position again to secure the top hat adaptor. Pole 93943004 Top hat adaptor...
Speakon Barrier strip Speakon Pin: 1+ , 1- INPUT/LINK INPUT/LINK Barrier strip CAUTION! RIGGING THIS SYSTEM SHOULD ONLY BE DONE + , - BY QUALIFIED PERSONS Professional Product Made in Denmark www.mach.dk Cable clamp Quality test Serial label number label...
Amplifier Sub Output Input 1+/1- Mains Terminal on speaker Terminal on Sub CW 115/218 INPUT/LINK INPUT/LINK In/Link Speakon Speakon INPUT/LINK INPUT/LINK CAUTION! RIGGING THIS SYSTEM SHOULD ONLY BE DONE BY QUALIFIED PERSONS Professional Product Made in Denmark www.mach.dk In/Link In/Link...
The C-range cabinets are made of plywood coated with Mach Safecoat and can easily be painted to match the color scheme of your venue. To paint your speaker: 1. Remove the front grille 2. Degrease the cabinet on all surfaces with denatured alcohol/methylated spirit...
Although subwoofer systems normally only require very limited maintenance there are several things you can do to ensure that your Mach system sounds as good 3 years after installation as on the day you bought it: Never overload your system – stay within the specified limits for power handling.
The CW115 is a reflex-loaded single-driver 15”subwoofer designed for applications where deep and fast bass is need from a compact enclosure. The CW115 is a perfect subwoofer for larger Mach installation in combination with Ci- Series speakers: CN7, CN8, CM7.
The CW215 is a dual reflex-loaded 15”subwoofer designed for applications where deep and fast bass is needed from a compact enclosure. The CW215 is a perfect subwoofer for use in combination with the Mach CM9, CN12 and CM12. The 15” woofer has a 4” voice coil and with a double spider for improved excursion control and linearity. It ensures good clean bass reproduction supporting the medium SPL top cabinets in the C-Range and the touring series.
The CW118 is a reflex-loaded single 18” subwoofer designed for applications where deep and fast bass is needed from a compact enclosure. The CW118 is a perfect subwoofer for Mach bigger installation with Ci-Series, CN7, CN8, CM7. The 18” woofer has a 4” voice coil and with a double spider for improved excursion control and linearity. It ensures good clean bass reproduction supporting the smaller and medium top cabinets in the C-Range together with the touring series.
The CW218 is a dual reflex-loaded 18”subwoofer designed for applications where deep and fast bass is needed from a compact enclosure. The CW218 is a perfect subwoofer for use in combination with the Mach CM9, CN12 and CM12. The 18” woofer has a 4” voice coil and with a double spider for improved excursion control and linearity. It ensures good clean bass reproduction supporting the medium and high SPL top cabinets in the C-Range together with the touring series.
Manufacturer: MACH Speaker A/S Perspektivvej 2 9900 Frederikshavn Denmark We, MACH Speakers A/S, declare under our responsibility that the following product(s) Product: CW115/CW215/CW118/CW218 Type: Subwoofer Are in conformity with: - COUNCIL DIRECTIVE of 3 May 1989 on the approximation of the laws of the Member States relating to...
For information on the warranty conditions specific for your country please refer to the material handed to you by your local Mach distributor. rdering spare parts In the unlikely event of your speaker breaking down some of the components can be ordered as spare parts.
-range overview Co-designed by contractors for contractors, the C-range is a breakthrough in installation speaker design and offers extraordinarily easy installation. From full range near-field speakers to medium-throw speakers, the C-range is ideal for many types of venues such as bars, cafés and large live or playback venues. Specifications: Power rating IEC268: 150 watt Power rating peak: 600 watt...
Page 18
Specifications: Power rating IEC268: 300 watt Power rating peak: 1200 watt Sensitivity 1w/1m: 96dB (avg.) Max SPL, calculated long term: 121dB Max SPL, peak: 127 dB Frequency range +/-3dB: 80 Hz - 20 kHz Dispersion angle avg. H 90 x V 60 deg. Nominal impedance: 8 ohm Recommended amplifier: 400 watt into 8 ohm Dimensions (HxWxD): 41.5 x 34.9 x 33.8 cm...
Page 19
Specifications: Power rating IEC268: 320 watt Power rating peak: 1280 watt Sensitivity 1w/1m: 97 dB Max SPL, calculated long term: 122 dB Max SPL, peak: 128 dB Frequency response +/-3dB: 72 Hz - 18 kHz Dispersion Angle: H 100 x V 65 deg. Nominal impedance: 8 ohm Recommended amplifier: 450 watt into 8 ohm WEIGHT &...
Page 20
Specifications: Power rating IEC268: 450 watt Power rating peak: 1800 watt Sensitivity 1w/1m: 102 dB Max SPL, calculated long term: 129 dB Max SPL, peak: 135 dB Frequency response +/-3dB: 58 Hz - 20 kHz Dispersion Angle: H 90 x V 55 deg. Nominal impedance: 8 ohm Recommended amplifier: 650 watt into 8 ohm WEIGHT &...