Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rocktron EN55013
Summary of Contents for Rocktron EN55013
- Page 1 Reaction Chromatic Tuner Instruction Manual...
- Page 2 To insure against this possibility, always use good shielded cables for all audio input and output connections. This will help insure compliance with the Directive(s). For more information about other Rocktron products, please see your local dealer or one of our importers closest to you (listed on the Rocktron website (www.rocktron.com).
- Page 3 Precautions Refer all service to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
- Page 4 “out of tune”, such as an old piano. Rocktron’s Reaction Series pedals are built into a rug- ged metal slim form factor chassis, taking up as little space as possible on your pedalboard. The Reaction Tuner is a TRUE BYPASS pedal: when you turn it off…it is out of your signal path!
- Page 5 Descriptions...
- Page 6 “in tune” this LED will light. 9VDC Input - This input jack (negative tip) provides 9VDC power to the pedal from the Rocktron DC OnTap 9V power supply (sold separately). SHARP Indicator LED - this flashing LED will light if the note being played is sharp. The more “sharp”...
- Page 7 Descriptions continued..ON/OFF LEDs - These LEDs shows if the pedal is on or off. When the LEDs are lit the pedal is on. When the LEDs are not lit the pedal is off. BATTERY COMPARTMENT and COVER - The 9V battery can be found in this compartment.
-
Page 8: Typical Connection
Typical Connection... -
Page 9: Tuning Instructions
Tuning Instructions: Step 1 - plug the guitar/bass into the tuner - see “connec- tions” section. Step 2 - play a note on your guitar. Pluck your E string, if needed, adjust your tuning machine on your instrument until the letter “E” appears in the NOTE Display window. Step 3 - if your note is flat - the “FLAT”... - Page 10 Calibration: To match the pitch of any instrument or audio source (like an old piano or tape player) press the “Calibrate” button while simultaneously playing the note on the instrument. (Note: you might have to first tune one string on the guitar or bass by ear to match the actual note if the piano is out of standard tuning or if the tape player you are playing along with runs slower or faster than normal).
-
Page 11: Hints And Tips
Hints and Tips: The Reaction Tuner is sensitive, so it is not necessary to strike your string very hard, standard string attack will work. Additionally, if you are in a loud environ- ment try using harmonics to tune your instrument. Lightly touch the string over the 12th fret of your instrument and pick the string with normal pick attack. -
Page 12: Specifications
+6Bu Input Impedance 1MΩ Output Impedance 1kΩ Current Consumption 20mA Power Requirements 9V Alkaline Battery or Rocktron DC OnTap Universal Power Supply (sold separately). Nega- tive Tip. Dimensions 125mm x 78mm 61mm 5” x 3.25” x 2.5” Weight 0.7kg 1.5lbs... -
Page 13: How To Change The Battery
Save yourself tons of money in batteries by using the Rocktron DC OnTap Universal Power Supply to power this pedal (sold separately). The Rocktron DC OnTap provides a constant flow of power to the pedal, unlike a battery that will degrade over time. - Page 16 Rocktron - A Division of GHS Corporation 2813 Wilber Ave Battle Creek MI 49037 www.rocktron.com info@rocktron.com tel: 1-269-968-3351 rev. 5-19-11 2011.1...
Need help?
Do you have a question about the EN55013 and is the answer not in the manual?
Questions and answers