Auto Voice Control (Avc) Singing Coach; Troubleshooting - Electrohome EAKAR535 Instruction Manual

Karaoke cd+g/mp3g player speaker system with digital key control
Table of Contents

Advertisement

Available languages

Available languages

Auto Voice Control (AVC) Singing Coach

To adjust the AVC:
Auto Voice Control can be activated by the AVC knob. The vocals on the multiplex recording will be muted when
the singer starts to sing through the microphone. When the singer stops singing, the vocals will resume to normal.
Problem
no power when the
power button is on
no power when
plugged in
no sound from TV
or PA
CD Player does not
work normally or the
LED displays "nO", "E"
or "00"
no sound − If audio
is going through TV
or VCR
no sound − When
audio is connected to
a home stereo
no video is displayed
from the TFT screen
OPeRATION

TROUBLeSHOOTING

Possible Problem
• no power plug connection at the AC outlet.
• Improper connection between the unit and
the AC power cord.
• The AC outlet may not have power.
• TV or PA system is set to minimum.
• TV or PA system is powered off.
• Patch cables are not connected securely.
• Disc is inserted upside down.
• Disc is dirty.
• Disc is scratched or warped
• A non-standard disc is inserted.
• Moisture has formed inside the CD deck.
• Karaoke system needs resetting.
• Patch cables are not connected securely.
• Source selection on TV or VCR is not correct.
• Source selection on your stereo is not set
properly.
• Improper connection to stereo system or
patch cables are not connected securely.
• TFT screen is turned off.
• The disc being played is a regular music CD,
therefore no image will be displayed.
• Insert the power plug into the AC outlet.
• Check the connection between the unit and
the AC power cord.
• Test the power outlet by plugging in
another appliance and turning it on.
• Turn up the volume on the TV or PA system.
• Power the TV or PA system on.
• Ensure white and red patch cables are
securely inserted into both the karaoke
system and the TV/PA system.
• Insert the disc correctly.
• Wipe clean with a soft cloth.
• Use a new disc.
• Only use discs bearing the standard logo.
• Wait about 20 - 30 mins to let it dry out.
• Disconnect the machine from the power
source for 30 seconds then reconnect.
• Ensure white and red patch cables are
securely inserted into both the karaoke
system and the home stereo system.
• Ensure that the source selection on the TV
or VCR is correct.
• Select AUX In as the source for your home
stereo.
• Ensure white and red patch cables are
securely inserted into both the karaoke
system and the home stereo system.
• Set SCREEn On/OFF button to On.
• Ensure you are playing a CD+G or CDG
Karaoke disc.
- 17 -
Solution

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents