Conair Cuisine CC-10 Instruction Booklet page 9

10-cup grind & brew coffeemaker
Table of Contents

Advertisement

Grinding On/Off
Hint:
Activate this function if you are using
coffee powder instead of coffee
beans.
Deactivate grind function
:
Press Grind off
button
once.
The Grind off LED will turn
on
.
Activate grind function: Press Grind off
button
again.
The Grind off LED goes
off.
Hint:
The Grind off LED goes off and the
function resets after brewing is finished or
if you turn off the unit. If you replug the
appliance,
within one minute after a tempo-
rary power
failure,
Grind off remains in the
previous state except in coffee cycle
.
Memory Backup
Hint:
The appliance is equipped with a back-
up memory in case of temporary power fail
-
ure. Programmable information will be stored
in
the
memory for 1 minute. The coffee cycle
(manually or Auto-On) can only be started by
pressing On/Off or Program
button again
.
Carafe Lid Operation
Your Conair Cuisine coffee carafe was
made with safety in
mind,
so please refer
to the image and directions at right in
order
to ensure proper
use.
• To pour:
Turn lid counterclockwise until
the OPEN marking (molded into carafe
lid),
lines up with the arrow on the carafe
handle.
• To close:
Turn
lid
clockwise until the
CLOSE marking (molded into carafe
lid),
lines up with the arrow on the carafe
handle.
Protection from Uncovered Lids
Hint:
For your safety this appliance will not
operate unless all
lids
are closed
completely,
and will terminate the coffee cycle if opened
during operation.
This appliance is equipped with a switch to
detect the motion of the grinder basket lid
as well as the lid
.
If one of these parts is
opened
accidentally,
the coffeemaker will
take following actions
to
prevent
danger:
Status
Protective Action
Solution
During Coffee Cycle
The coffee cycle is
Close both
lids.
If
grinding
terminated
.
All LEDs (except
has been completed prior to
backlight) go
off.
cycle termination
,
press the
Grind Off
button,
then press
the On/Off or Program
button to restart cycle.
During Auto-On function
When the
programmed time
Close both lids.
The
Auto-
(Auto-On Function remains
is reached
,
the
Auto-On
On function will operate
active)
function will not start to
normally.
grind/ brew,
and all modes
are terminated
.
No active coffee
cycle/ Auto-
The
coffee cycle (grind
Close both
lids.
The previous
On (The Clock is
operating).
process
and brew cycle)
status is unchanged and the
cannot be activated
.
time will keep on running
.
The coffeemaker operates
normally.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents