Smart Touch Technology; Troubleshooting Pointers - Mio Sport Instruction Manual

sMArt touCh teChnologY

With MIO Smart Touch Technology, obtaining your on demand heart rate
has never been easier. You can get a reading by placing your finger tips,
palms or just about any part of your hand on the stainless steel sensor.
Experiment to find your own preference.
A one-time read out of your Heart Rate (HR) in beats per minute (BPM) will
display. The small digits at the right of the display show the percentage of
your maximum heart rate (up to 99%).
» For continuous reading, keep pressing the sensor.
» For best accuracy, left and right hands should not be in contact during
the test.
» If exercise timer is running, the screen will also show your exercise
calories burned during exercise after you remove your finger from the
sensor.
» You can take your Heart Rate from any mode (except SETTING modes).

trouBleshooting pointers

If you don't get your heart rate (HR) within 10 seconds, moisten your
finger(s) and watch caseback and try again. It helps to wear your MIO for a
little while to allow a layer of moisture to build up between the back of the
watch and your arm/wrist.
Exercising vigorously with a lot of arm movement or body motion can
cause muscle noise" that may prevent proper detection of a HR signal.
7 English