Table of Contents
Advertisement
Remote Controller
POWER
• To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the air conditioner is on the High cool mode and the temp. at 72°F(22˚C).
TEMPERATURE SETTING
• This button can automatically control the temperature of the room.
The temperature can be set within a range of 60°F to 86°F by 1°F.(16˚C to 30˚C by 1˚C)
Select the lower number for lower temperature of the room.
FAN SPEED
• Every time you push this button it is set as follows. (High Low Mid High ...).
SLEEP MODE
• Press the sleep mode button to set the time you want the unit to turn off automatically.
• Every time you push this button, the remaining time will be set as follows.
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 0Hour 1Hour 2Hours ... )
ENERGY SAVER
• If the switch is set to "On", the fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
AUTO SWING
• This button can automatically control the air flow direction.
MODE
• Every time you push this button, it will toggle between COOL, FAN and DRY.
7
Power
Temp
Fan Speed
Sleep
Mode
Energy
Auto
Saver
Swing
Advertisement
Table of Contents
