Table of Contents
Advertisement
Set Time & Date
Use this menu (Menu 9.3) to configure the settings for the time and date
display.
To modify Time & Date settings:
1. In Idle mode, press the
2. Highlight Settings and press the Select soft key or the
3. Select Set Time & Date and press the Select soft key or the
4. Change settings as required (see below).
5. To save changes, press the Save soft key.
The following settings are available:
♦
Time Zone Updating: Lets you specify how the time zone information is
updated (Automatic, Prompt first or Manual only).
If Manual Only is selected, the following options are enabled:
• Home Zone: Lets you specify your location relative to Greenwich
Mean Time. Scroll left or right to indicate your time zone. You can
also enable or disable Daylight saving, as appropriate.
• Time: Lets you enter the current time using the keypad. Scroll left or
right to highlight the number you want to modify and then type the
new information. To switch between AM and PM, highlight the
indicator and press the right navigation key or any number key.
• Date: Lets you enter the current date using the keypad. Scroll left or
right to highlight the information you want to modify and then type the
new information.
♦
Time Format: Lets you specify the time format you prefer (12 hour or 24
hour clock). Scroll left or right to select.
♦
Date Format: Lets you specify the date format you prefer to use. Press
the
key to open the selection screen, highlight a format and press the
key to access the menu.
key.
key.
Settings
147
Advertisement
Table of Contents
