Advertisement
(7) RF Stray and Odd Shut Down
It may happen that a part of the amplified large RF signal intrudes into the radio system
to cause such an instable behavior during the transmission, that the transmission signal
gets distorted, and that DC power supply voltage jumps up.
To cure these troubles, it is suggested that clip-on ferrite cores are inserted at both
ends of all the DC power and control cables as well as coax cables.
Such ferrite cores are available from Amidon Associates, Palomar Engineers, TDK
Corp. and so on.
When " PROT" LED lights, you need to reset the amplifier to release the shut-down.
After checking possible causes of shut-down, turn off and on the POWER switch to
reset.
8. Optional Parts
Remote Controller
(5 feet, with 8 pin DIN plug)
Extension Cable HRC-6L (13 feet)
(13 feet, with 8 pin DIN plug and DIN jack)
TOKYO HY-POWER LABS., INC.
1-1 Hatanaka 3-chome, Niiza,
Saitama 352-0012 JAPAN
Phone :
+81(48)481-1211
Fax :
+81(48)478-7453
Email :
info@thp.co.jp
Web :
http://www.thp.co.jp
TOKYO HY-POWER LABS., INC. - (USA Office)
6046 FM 2920 Rd
Suite 133
Spring, Texas 77379-2542
Phone :
713-818-4544
Email :
thpsupport@airmail.net
9
Advertisement
