Getting A Picture; Viewfinder; Recall Standard Video Values; Exposure - Infinity DMC 1000 User Manual

Chapter 8
Shooting

8.1 Getting a picture

8.1.1 Viewfinder

1. To set up the viewfinder refer to "Viewfinder" on page 39.
2. Aim the camcorder at the subject and use the viewfinder to monitor the picture.
–

8.1.2 Recall standard video values

You may wish to recall the standard video values if you want to ensure that the camcorder
video parameters are not set to unusual values.
➢
Press the Std. Recall button on the left side of the camcorder and hold it for a few
seconds.

8.1.3 Exposure

Iris
Select either the automatic (A) or manual (M) iris mode on the lens. In manual mode the iris
can be controlled by turning the iris ring on the lens. In automatic mode there are two auto iris
modes available in the camcorder:
– Auto iris: the light levels are automatically adjusted; you can still set gain and exposure
– Extended auto iris: The extended auto iris function automatically controls iris and gain
Monitoring exposure
Set the zebra switch on viewfinder to On to indicate high exposure levels with a striped
pattern.
DMC 1000 Digital Media Camcorder User's Guide (v1.15)
If you press the live button
on the display.
speed.
to suit the lighting conditions.
below the side panel display, the live picture is also displayed
Chapter 8 - Shooting
93