Philips 30PF9975/17 User Manual page 11

2245.1 am 01-09-2003
Time zone
This function allows you to select your local time
zone. Broadcasted time information will correct
the clock display for your local time.
&
Select
Time zone
é
Press the cursor right to select your local time
zone.
Daylight saving
Daylight saving time is automatically set by specially
broadcasted signals.This menu item allows you to
disable the automatic setting of daylight saving
time.This is useful if you live in an area or state
where daylight saving is not applied, but you receive
channels from other areas where daylight saving
signals are broadcasted.
& Select
Daylight saving
é
Press the cursor right to select
automatic clock correction for daylight saving
time, based on specially broadcasted signals.
"
Select Off to disable automatic clock
correction based on the specially broadcasted
signals.
Source
Settings
AV1
AV2
AV3
YPbPr
FRONT
Center input
Center in volume
16:09 Pagina 7
with the cursor down.
with the cursor down.
Automatic
&
Select
é Press the cursor down to select one of the external AV inputs.
Source
"
Press the cursor right to enter the list of types of devices
attached to the selected input.
'
Select the accessory device with the cursor up/down.
Once you have named the source, e.g.VCR, this source will
automatically be selected when your remote control is in VCR
mode, see p. 3, and when you press the v button on the
remote control.
(
Press the
menus on screen.
Press the v button on the remote control.
§
The Source Select menu appears in which you may select a
source or peripheral connected to be displayed on screen.
Center input - Center in volume
When you have connected a multichannel surround receiver to
the TV, the loudspeakers of the monitor can act as center
speaker, making a separate center speaker unnecessary;
Select
When having selected
with the cursor left/right to correct volume level differences of
the external audio receiver and speakers.
Set/Change PIN
& Select or
Set Change PIN
down.
é If no PIN-code exists yet, the menu item is set
to Set PIN . Follow the instructions on screen.
If a PIN-code has previously been entered, the
menu item is set to
instructions on screen.
All number combinations from 0000 to 9999
are valid numbers.
"
The General menu reappears with a message
confirming that the PIN has been created.
Important:You have forgotten your PIN !
& Select
Change PIN
press .
OK
é
Press the cursor right to enter the overriding
PIN-code 0-7-1-1.
for
"
Press the cursor again and enter a new
personal 4-digit PIN code.The previous code is
erased and the new PIN-code is stored.
with the cursor right.
Source
button on the remote control to turn off all
MENU
Center input On.
On you can adjust the Center in volume
with the cursor
. Follow the
Change PIN
in the General menu and
7 7