IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1.Read and follow all instructions and warnings. 2.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY, READ AND FOLLOW THESE INSTRUCTIONS. 1.Use only the following type and size of batteries: 3 size “AA” alkaline batteries (not included). 2.Do not dispose of the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
IMPORTANT TELEPHONE COMPANY& FCC INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is compliance with part 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
Page 5
- Consult the dealer or an experienced radio / TV technical for help. Thank you for purchasing an Emerson phone product, Your Emerson telephone is designed to provide many years or trouble free performance .Please follow the safety and operating instructions below.
CONNECTING YOUR TELEPHONE HANDSET WALL JACK REAR Connect the coil cord to the jacks at the bottom of the HANDSET Connect the straight line cord to the and side of the TELEPHONE jack at the REAR of the telephone and WALL JACK...
CHECKING THE PACKAGE CONTENTS As you unpack this set, make sure you have the following items in the package. HANDSET TELEPHONE BASE COILED HANDSET CORD WALL MOUNT ADAPTOR STRAIGHT TELEPHONE (attached to the back of the LINE CORD base for wall mounting) POWERING THE PHONE Before you connect the phone cords, follow these steps to install the batteries: 1.
OPTIONS MENU To enter the Options Menu: dial/menu 1. Press and hold the button until “Options Menu” is shown in the display. up/down dial/menu 2. Use the buttons to scroll through the options below, and press the button to select the desired option you wish to set: •...
PAUSE FUNCTION Example: In an office where you need to dial a 9 first to get an outside line. redial Dial the number 9 and press the button, and then dial the phone number. You will see a “P” displayed for pause. You may also store this into memory. STORING PHONE NUMBERS INTO MEMORY store 1.
CALLER ID SYSTEM This telepphone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 60 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature.
Page 11
TROUBLESHOOTING PROBLEMS CHECK The Caller ID unit will not function until you have The Caller ID display does not subscribed to Caller ID service from your local show the caller’s information. telephone company. Call your local telephone company to have Caller ID service installed on your phone line.
TROUBLESHOOTING PROBLEMS CHECK redial Check if shows in the display. Since the “P” does not work. LINE REDIAL button has combined function (pause function), the phone may have been paused. Just press the HOOK switch. Feedback or squealing when Volume is too high. Reduce the SPEAKERPHONE using SPEAKERPHONE.
Page 13
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU ALSO MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. Manufactured by: AIT Inc., Brooklyn NY, 11232 Emerson and the G-Clef logo are registered trademarks of Emerson Radio Corp., Parsippany, New Jersey USA...