LG 60PG70FR Service Manual page 9

(1) Connect the download jig to D-sub jack
(2) Connect the PC to USB jack
6-2. Download Steps
(1) Execute 'ISP Tool' program in PC, then a main window will
be opened
(2) Click the connect button and confirm "Dialog Box".
(3) Click the config button and change speed
E2PROM Device setting: over the 350Khz
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
(4) Read and write bin file
Click "(1)Read" tab, and then load download file(XXXX.bin)
by clicking "Read".
(5) Click "Auto(2)" tab and set as below
(6) Click "Run(3)".
(7) After downloading, check "OK(4)" message.
[ Notice : From this sentence, All working is mass production.
LGE Internal Use Only