Advertisement
❒ 6 InSTAll The TrIM KIT frAMe
Position the assembled Trim Kit frame around the
A
oven.
Secure the Trim Kit by driving four screws (B) through
B
the trim kit into the cabinet.
CAuTIOn
— Start all screws before tightening
any one screw. do not overtighten screws since it can
cause misalignment of top/side strips.
1" 2.5 cm; 1' = 0.3 m
DE68-03364A
350A4502P745
08-13 ATS
Printed in China
Installation Instructions
Screw B
reAd CArefullY. KeeP TheSe InSTruCTIOnS.
4
❒ 7 rePlACe AnY lOOSe ITeMS
Your trim kit is now fully installed. Replace
A
the turntable and turntable support that was removed
from inside the microwave oven.
Keep these installation instructions and extra screws
B
for future reference and need. Do not place them in
the microwave oven.
Replace the house fuse, or close the circuit breaker to
C
restore power at the service panel.
Advertisement
