Summary of Contents for Arise COLOUR TELEVISION
-
Page 1: User Manual
Pantone 2746C Black COLOUR TELEVISION USER MANUAL Before operating this product, please read these instructions completely. - Page 2 INTRODUCTION Thank you very much for your purchase of this product. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference.
-
Page 3: Table Of Contents
CONTENTS SAFEGUARDS & SAFETY PRODUCT FEATURES LOCATIONS OF CONTROL PANEL OPERATION OF REMOTE CONTROL CONNECTIONS AUTOMATIC PRESET CHANNEL OPERATION OF FUNCTION MENU 11-14 TROUBLE SHOOTING GUIDE SPECIFICATIONS... -
Page 4: Safeguards & Safety
SAFEGUARDS & SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, in order to reduce the risk of fire, electric shock, and/ or injury to persons, basic safety precautions should always be followed. FOR YOUR SAFETY Read all instructions carefully even if you feel you are quite familiar with the appliance. This appliance is not intended for use by young children or infirm persons without supervision. -
Page 5: Product Features
PRODUCT FEATURES INSTALLATION Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the receiver and the wall to permit proper ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet, or premature component failure. -
Page 6: Locations Of Control Panel
LOCATIONS OF CONTROL PANEL TV/AV MENU V- MENU TV/AV TV/AV MENU V- NOTE: The TV pictures used in the manual may not look like the actual, please refer to the actual TV pictures Program +/- Buttons TV/AV Switch Button Power Indicator Volume +/- Buttons Power On/Off Button Remote Control Sensor... -
Page 7: Operation Of Remote Control
OPERATION OF REMOTE CONTROL DESCRIPTION OF REMOTE CONTROL KEYS The unit has the function of no signal muting and no signal auto switching off. If there is no signal for 15 minutes, it can be turned to standby status automatically. 2. - Page 8 OPERATION OF REMOTE CONTROL DESCRIPTION OF REMOTE CONTROL KEYS 8.SOUND MUTE BUTTON 18.LOCK BUTTON Press the MUTE button to mute the sound Press the button, ---- will appears on the completely. Press the button once again to screen. restore the previous sound level, and cancel Pressing the password the digits that you defined the mute.
-
Page 9: Connections
CONNECTIONS INSTALLATION OF ANTENNA Aerial cable Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above. Note: For better reception, especially in outlying area or where ghost or interference happens, an external roof-mounted antenna is recommended. -
Page 10: Connection To Other Equipment
CONNECTIONS CONNECTION TO OTHER EQUIPMENT This TV set can be connected to a video cassette recorder, video disc player, video camera, game player.(Not available for audio only) Note: If it is non-AV1, AV2 models, please don't input the rear AV and side AV at the same time. SIDE AV CONNECTIONS Connection scheme: 1. - Page 11 CONNECTIONS REAR S-VIDEO CONNECTIONS (Optional) Connection scheme: 1. Connect the TV set with DVD Player. 2. Press the Mains Power Button on the TV set to turn on the TV set. 3. Press TV/AV button on the Remote Controller to select SVHS mode. 4.
-
Page 12: Automatic Preset Channel
AUTOMATIC PRESET CHANNEL 1. Connect your cable or Antenna to the Terminal Antenna Jack. 2. Press the menu button on the TV set or on the remote control until you see the Search menu. 3. Press the P+/P- button on the TV set or on the remote control to select AUTO SEARCH item and AUTO SEARCH item turns black. -
Page 13: Operation Of Function Menu
OPERATION OF FUNCTION MENU MENU OPERATION Press MENU button on the TV set or on the remote control to select picture menu, sound menu, timer menu, settings menu and search menu. Shown as below: (PICTURE MENU) (SOUND MENU) (TIMER MENU) PICTURE SOUND TIMER... - Page 14 OPERATION OF FUNCTION MENU AUTO SEARCH OPERATION 1. Press P+/P- button to select AUTO SEARCH item. 2. Press V+/V- button to begin searching. After searching all wave band, auto search stop. In the course of the auto searching, press MENU button to stop searching. After auto search finished, the unit returns to the normal reception status.
-
Page 15: Sound Menu Operation
OPERATION OF FUNCTION MENU 2. Press V+/V- button in order to increase or decrease contrast (0~100). COLOUR ADJUSTMENT 1. Press P+/P- button to select COLOR item. 2. Press V+/V- button in order to increase or decrease colour (0~100). SHARPNESS ADJUSTMENT 1. - Page 16 OPERATION OF FUNCTION MENU BLUE SCREEN SETTING (Optional) 1. Press P+/P- button to select BLUE SCREEN item. 2. Press V+/V- button to select ON or OFF. PICTURE ENHANCE / CURTAIN SETTING (Optional) 1. Press P+/P- button to select PICTURE ENHANCE or CURTAIN item. 2.
-
Page 17: Trouble Shooting Guide
TROUBLE SHOOTING GUIDE Many apparent malfunctions are caused slight misadjustments of the regular controls of your unit or equally simple causes. If any difficulty arises through normal use of your unit, check the list of common problems in the list below. If the problem persists, unplug your unit and contact your dealer. -
Page 18: Specifications
SPECIFICATIONS NOTE POWER SHOWN ON BACK PLATE POWER CONSUMPTION SHOWN ON BACK PLATE SOUND-SYSTEM D/K, B/G, I, M (OPTIONAL) COLOUR-SYSTEM (OPTIONAL) PAL/SECAM NTSC playback ANTENNA VIDEO CONNECTION INPUT: 2, OUTPUT: 1 Phono: 1VP 75 AUDIO CONNECTION Phono: 500mVrms INPUT: 2, OUTPUT: 1 Y: 1Vp;...
Need help?
Do you have a question about the COLOUR TELEVISION and is the answer not in the manual?
Questions and answers