Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for
future reference.
Dyna-Glo
Gas-Fired Radiant Heater
Description
Dyna-Glo Delux Model RA125LPDGD heater is a 125,000 BTU/Hr construction
heater.
This heater uses propane gas for combustion. It is primarily intended for
temporary heating of well-ventilated buildings under construction, alteration
or repair. This heater should be utilized in sheltered, well-ventilated areas,
but never in occupied dwellings.
Unpacking
1. Remove heater, accessories and all
hardware from the shipping carton.
NOTE: Save the box and packaging
materials for future use. After
unpacking unit, inspect carefully for any
Specifications
Fuel Consumption
Model
BTU/Hr
Maximum
RA125LPDGD 50,000 to
16.3 x 29.8
125,000
Fuel Type – Propane Only
SIZE AND CAPACITY OF PROPANE
GAS CYLINDERS
Temperature
No. of Tanks Needed
(°F) at Tank
50,000 BTU/Hr 100,000 BTU/Hr
32
1
20
1
10
1
0
1
-10
2
-20
2
NOTE: Chart above shows number of
100 pound tanks needed to operate this
heater at a given temperature.
Less gas is vaporized at lower
temperatures. You may need two or
more 100 pound tanks, or one larger
tank in colder weather. Your local
propane gas dealer will help you select
the proper supply system.
Delux Propane
®
damage that may have occurred during
transit. Check for loose, missing or
damaged parts. Shipping damage claim
must be filed with carrier.
Manifold
Pressure
5.77 lbs/hr
Ignition Type – Piezo
General Safety Information
Make sure you read and thoroughly
understand these safety and operating
instructions. Keep these instructions for
2
future reference. They are your guides
2
to safe and proper operation of this
3
heater.
3
Use Larger
hazardous situation which, if not
Tank
avoided, WILL result in death or
Use Larger
serious injury.
Tank
hazardous situation which, if not
avoided, COULD result in death or serious
injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Printed in China
CSA 2.14b-2009, ANS Z83.7b-2009
Construction Heater
GHP Group, Inc.
8280 Austin Avenue
Morton Grove, IL 60053
Inlet Gas Supply
Pressure
Ignitor Gap
11" W.C.
Min. 5 psi
Max. Bottle Pressure
Indicates an
imminently
Indicates a
potentially
Indicates a
potentially
Rev 2012-06-08
RA125LPDGD
C
US
Figure 1 – Model
RA125LPDGD
Dimensions
Weight (Lbs)
L x W x H (in.)
0.19"
20.3 (heater) 16.3 x
Minimum Operating Temp. – -20°F (-29°C)
Always turn off
heater at control
knob and then close LP cylinder when not
in use.
Do not operate this
heater until you have
read, and thoroughly understand these
safety and operating instructions. Failure
to comply with the precautions and
instructions provided with this heater can
result in death, serious bodily injury,
property loss or damage from the
hazards of fire, explosion, burns, or
electrical shock. Only persons who can
read and understand these instructions
should use or service this heater. Not for
residential, household or recreational
vehicle use. Please read this manual.
Consumer: Retain this manual for
future reference.
E
N
G
L
I
S
H
E
S
P
A
—
O
L
F
R
A
N
Ç
A
I
S
PROFESSIONAL GRADE